ZIDOO - Z10 PRO - Z9X - Z1000 PRO - UHD 3000 - NEO A - NEO S - NEO X - Dolby Vision - Owners Thread

Are you sending a gift? Write “personal gift" on the air waybill.
If you indicate to customs that your package is not commercial in nature by stating “personal gift” after the description, you sometimes avoid taxes and import duties. For example, gifts up to a value of €45 that enter Belgium are not subject to taxes and import duties or VAT. Gifts with a value above €45 are not subject to taxes and duties, but may be eligible for VAT. Our customer service will gladly assist you.

Important – only small amounts of excise goods (such as perfume or eau de toilette) will be accepted as a personal gift under or equal to €45.
 
With regards to this remote, is this Bluetooth for the Z9X? I ask as with my set up the Z9X is behind the listening position so I have to kind of point behind me, with this remote would it work from anywhere in the room I.e. stopping my from having to point behind me directly at the Z9X?
 
With regards to this remote, is this Bluetooth for the Z9X? I ask as with my set up the Z9X is behind the listening position so I have to kind of point behind me, with this remote would it work from anywhere in the room I.e. stopping my from having to point behind me directly at the Z9X?
Yes will work as its Bluetooth will work with all models .
i have been using another brand of remote for years now …..
Just use Zidoo Remote to power mine on then straight in draw.

Using bluetooth it picks up pretty quick from boot up much much better than the previous Z10 model i had .

Must keep your Aerials on as they are Bluetooth Aerial pick ups .
Bluetooth you dont need to point hence why ive been using one from the start.

As for distance range i dont know but id imagine it be no issues for
most unless your 25 foot away 😎😎

Note : This is based on my Bluetooth remote but via Bluetooth protocols cant see any diff using the New Zidoo Bluetooth Remote .

( it still will not control your vol on a av Amp / receiver etc )

Compatible with Zidoo NEO S, UHD3000, Z9X, Z10 Pro, Z1000 Pro, UHD2000, Z9S, Z10, Z1000, X20, X20 Pro, X9S, X10 Models
 
Last edited:
Can you turn on the box with bluetooth remote or just leave it on "stand by"?
 
Can you turn on the box with bluetooth remote or just leave it on "stand by"?

As mentioned above
“ Just use Zidoo Remote to power mine on then straight in draw.”

so the Bluetooth will not power ON the Zidoo
but will shut it down / OFF etc
 
Sorry if this is a daft question, just trying to get my head round streaming. Is anyone using Tidal on their UHD3000. I’d like to know if Is it possible to use iPhone/iPad to control the UHD3000 or if it would stream/cast in the master quality. At present on my nvidia shield it will only cast in HIFI quality. I can use the App within the shield and get the master quality tracks,but that means having projector on just to listen to music. I like the look of the zidoo for its video and storage capabilities but I’m just wondering which one (if any) would allow me to control my tidal subscription from phone/iPad, get access to the master quality and without needing to turn the projector on?
 
incoming
1642436939369.jpg
:D
 
Once you Go Bluetooth you Never look back . 😎😎
Mixed results if it works it's good but loses a lot bluetooth connection i give it a go later this night see what's happening then ....
 
Mixed results if it works it's good but loses a lot bluetooth connection i give it a go later this night see what's happening then ....

Cant comment on that particular remote on if good or bad connections etc
But the model i use has been pretty reliable on connection etc .

let us know how you get on is it Bluetooth 5.0 or ?
 
Cant comment on that particular remote on if good or bad connections etc
But the model i use has been pretty reliable on connection etc .

let us know how you get on is it Bluetooth 5.0 design is good and the back lite was an function i was pleased with.
 
Last edited:
Hi,
I have zidoo z9x with remote that stopped working.
I received a new remote from the seller and it doesn't work as well.
I thought about doing factory reset, but afraid not being able to control the box at all
because wi-fi settings will be gone. Now at least i can control it through app.
Can firmware be the reason it doesn't work? May be I can downgrade.
Now it is 6.3.60g and, as I understant, it's not official firmware.
Or I can buy bt remote and turn it on/off with button on the tv box.
Any suggestion?
Thanks.
 
Hi,
I have zidoo z9x with remote that stopped working.
I received a new remote from the seller and it doesn't work as well.
I thought about doing factory reset, but afraid not being able to control the box at all
because wi-fi settings will be gone. Now at least i can control it through app.
Can firmware be the reason it doesn't work? May be I can downgrade.
Now it is 6.3.60g and, as I understant, it's not official firmware.
Or I can buy bt remote and turn it on/off with button on the tv box.
Any suggestion?
Thanks.

Firmware v6.3.66 is latest release at moment .

Z9X
v6.3.66
http://apidl.zidoo.tv/Z9X/v6.3.66/Z9X_P_v6.3.66_202112211656_ota-package.zip
MD5:5A5212DD43E14C629E6AA1916E7ED487

v6.3.66_G(Google play)
http://apidl.zidoo.tv/Z9X/v6.3.66/Z9X_P_v6.3.66_G_202112211834_ota-package.zip
MD5:E62121493FE03C7129DB75CCAF9C653B

If you get any Bluetooth Remote it can be used for the basic functions on your Zidoo and help navigation at least .
but wont power on unit .

Odd your now two remotes dont work . 😬😬
Dont forget keep Antennas connected & enable Bluetooth under settings plus you may have to navigate and locate your attached remote Etc .
 
It sucks design is good and the back lite was an function i was pleased with. The remote constantly looses it connection so no worth buying . Total rubbish. For the record all the other remotes with bluetooth work fine before anyone question my ability to pair an sh*tty remote.

Thats odd
remind me what model Zidoo your using again .
And Antennas attached yes .
 
Thats odd
remind me what model Zidoo your using again .
And Antennas attached yes .
Z10pro no antennes just wired internet
 
Z10pro no antennes just wired internet

Thats your issues !
You need the Antennas connected so that it makes bluetooth connection .
Hence why on & off issues .
 
Thats your issues !
You need the Antennas connected so that it makes bluetooth connection .
Hence why on & off issues .
Ok thanks for the tip Will give it a go when i return from work . Report back with the result :facepalm:
 
Last edited:
Ok thanks for the tip Will give it a go when it return from work . Report back with the result :facepalm:
You should be back up & fully running now . 😎😎
 
Firmware v6.3.66 is latest release at moment .

Z9X
v6.3.66
http://apidl.zidoo.tv/Z9X/v6.3.66/Z9X_P_v6.3.66_202112211656_ota-package.zip
MD5:5A5212DD43E14C629E6AA1916E7ED487

v6.3.66_G(Google play)
http://apidl.zidoo.tv/Z9X/v6.3.66/Z9X_P_v6.3.66_G_202112211834_ota-package.zip
MD5:E62121493FE03C7129DB75CCAF9C653B

If you get any Bluetooth Remote it can be used for the basic functions on your Zidoo and help navigation at least .
but wont power on unit .

Odd your now two remotes dont work . 😬😬
Dont forget keep Antennas connected & enable Bluetooth under settings plus you may have to navigate and locate your attached remote Etc .
Thanks.
What is odd that when I check for updates, it says that device is "up to date".
Is that official firmware? If so, why don't I receive ota updates?
 
Thanks.
What is odd that when I check for updates, it says that device is "up to date".
Is that official firmware? If so, why don't I receive ota updates?

Like many its Beta
im on it now .👍
many are not pushed o.t.a.
So dont worry about it .

If Zidoo deem to push an update ota it will come on your box .
 
Like many its Beta
im on it now .👍
many are not pushed o.t.a.
So dont worry about it .

If Zidoo deem to push an update ota it will come on your box .
Got it. Thanks.
I will give it a try.
Should I reboot the device a few times after update via usb?
 
Got it. Thanks.
I will give it a try.
Should I reboot the device a few times after update via usb?

After the firmware has loaded on
and your on the new firmware and its completly finished its update and powered on with new one etc
yes reboot a couple of times .
and if you prefer ( some do some dont ) unplug from the mains for a period of 30 sec to a min .

and your good to go .
 
After the firmware has loaded on
and your on the new firmware and its completly finished its update and powered on with new one etc
yes reboot a couple of times .
and if you prefer ( some do some dont ) unplug from the mains for a period of 30 sec to a min .

and your good to go .
OK. Thanks.
 
Works like a honeybee now changed the above complain tot a praise. Fair is fair. Thanks for the help.:thumbsup:
 
Last edited:

The latest video from AVForums

Is 4K Blu-ray Worth It?
Subscribe to our YouTube channel
Back
Top Bottom