Z1 diy Mount for £8

Having looked around at the various diy mounts around i nicked a few ideas ( sorry to any1 involved)

i knocked this one up from bits and bobs from B&Q if you want a parts list or any comments good or bad please post here:

 

more pics

 

1more

sorry about the resolutions

 

OY!!! thats like mine!!!

 

morphy,

Any chance you could post a parts list. Looks like a neat easy job but it is always more simple if you know exactly what bits to get.

 

Parts list as follows:

1no 9" X 13" 12mm thick mdf/ply.... i used mdf and painted it
1no furniture leg aluminium from b&q
7no 60mm m6 bolts
10no washers for above
10no nuts for bolts


any more info just ask


and beece sorry mate lol................

 

Both nice jobs.
Can I enquire how you have attached then to the celing

 

the ali leg comes in three parts
1 the body
2 bottom abjuster which i drilled through
3 top adjuster which already has holes through it.....
1+2 thread into the main body


i didnt have any joist where i wanted to position mine so i used toggles http://www.screwfix.com/app/sfd/cat/pro.jsp?ts=49689&id=15328

 

Why have you got that 60w bulb hanging from your Sanyo ? To up the ansi ?

 

watt do you mean bulb hanging down

no seriously this pj lark had to be real wife friendly otherwise it was going to be a no,no..

firstly she werent too happy about moving the furniture around,
secondly she didnt want cables everywhere
thirdly she definetly didnt want a screen on show....

so ive had to compromise and compromise but finally ive almost got what i want

 

i used a speaker stand for my mount.

only down side, was drilling 2 holes in the ceiling to get it through.
but its very neat so pretty happy about it.

 

beece nice job,
unfortunately i havent got access to ceiling void,
my upstairs neighbour might dissaprove a bit: