Vision masthead PSU - Which wire goes where?

nick270881

Active Member
I have purchased a new Aerial together with a Vision Masthead amp/splitter. It comes with its own power supply but I don't know which wire goes into which socket on the PSU.

I have attached a picture of it below, there are 2 f sockets, one with an arrow pointing into the psu, the other pointing out, but which socket should the downlead from the aerial plug into and which one into the tv.

Thanks

Nick
 

Attachments

  • Default.aspx.jpg
    Default.aspx.jpg
    8.3 KB · Views: 1,344

flying haggis

Active Member
I have purchased a new Aerial together with a Vision Masthead amp/splitter. It comes with its own power supply but I don't know which wire goes into which socket on the PSU.

I have attached a picture of it below, there are 2 f sockets, one with an arrow pointing into the psu, the other pointing out, but which socket should the downlead from the aerial plug into and which one into the tv.

Thanks

Nick

at a guess the f socket with an arrow pointing out will go to the telly and the one with the arrow pointing in will be the feed from the amp splitter and will also be the cable that carries the power up to the amp
 
R

RB2004

Guest
it looks like a 4 way masthead amplifier,

Aerial goes into the F connection labelled with eigther IN, or an arrow pointing in.

Then the outputs are the F connections labelled Out, or have arrows pointing out.

Power supply can connect to any output on the masthead amplifier
 
E

Electrified

Guest
I have this amp. The aerial does indeed connect to the inward pointing arrow (marked "5 VDC") and is next to the green LED. This provides the power to the masthead amp. The outward pointing arrow goes to the TV.
 

The latest video from AVForums

Movies Podcast: Star Trek in 4K. Is the new boxset worth it?
Subscribe to our YouTube channel
Support AVForums with Patreon

Top Bottom