1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Trust - Multi Connect Bay

Discussion in 'Desktop & Laptop Computers Forum' started by blackstone, Dec 28, 2004.

  1. blackstone

    blackstone
    Active Member

    Joined:
    Oct 10, 2003
    Messages:
    127
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    18
    Location:
    Glasgow
    Ratings:
    +4
    I have a USB 2.0 Multi connect bay installed on my machine with the active light on but not reading SD memory card from my camera. I have looked at the trouble shooting section and it might be a cable is not connected inside the PC. The SD card is compatible. Any ideas why it is not reading before I take the PC back to check the ? cable fault. Any advice appreciated :lease:
     
  2. Rob

    Rob
    Active Member

    Joined:
    Jul 17, 2000
    Messages:
    1,279
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    51
    Location:
    Norwich
    Ratings:
    +33
    Sorry if this is obvious, but have you connected the USB (labelled card reader)from multi connector socket into another port?

    Is the SD card inserted with the pin side up?

    Another possibility is that you may need to wiggle the card a bit (I know this sounds daft, but it sometimes works) Worth a try anyway.

    Regards Rob.
     

Share This Page

Loading...