My setup is as follows:- RDXS32 AV1 to Sharp LC22SV2E (IXOS scart lead) RDXS32 AV2 to Pioneer Freeview DBR-TF100 AV1 scart socket Xbox to Pioneer Freeview VCR scart socket Toshiba RDXS32 has AV1 and AV2 set to RGB. The problem I have is that when the Toshiba is on and I press TV/DVR to go back to watching the TV I get sound but the picture is from the Tosh not the TV. The picture you get is also moving down and across the screen. If I change the Tosh AV1 setting to Video all is OK but no auto AV switching. Does anyone out there know what may be causing this? Normally this won't cause me problems but I would like cure this if possible.