Having just bought a Toshiba 28Z07B widescreen television and Toshiba SD210E DVD player, I am trying to connect the two using the component video connections. However I am experiencing difficulties Im getting a picture but no sound. Ive looked through the instruction manual of the TV and the DVD player a hundred times and cant see what Im doing wrong. I was hoping that somebody on this forum might be able to help me. As per the DVD player instruction manual, I have connected a set of triple phono leads between the component video output connections on the DVD player and the component video input connections on the TV. Im assuming that it doesnt matter which colour phono lead goes in which socket as long as it is connected to the corresponding colour socket on the component video input connections on the TV. (AM I RIGHT IN ASSUMING THAT THE COMPONENT VIDEO CONNECTIONS ONLY CARRY A VIDEO SIGNAL BUT NOT AUDIO? THIS WOULD EXPLAIN WHY THE INSTRUCTION MANUAL ASKS ME TO DO WHAT IS DESCRIBED IN THE FOLLOWING PARAGRAPH.) As per the DVD player instruction manual, I have also connected red and white phono leads between the audio output connections on the DVD player and the audio input connections on the TV. Through the TVs menus, I have changed the input signal for the AV3 channel to component video. Through the DVD players menus, I have changed the audio out selection to analog 2ch (I have tried the other options of bitstream and PCM as well, but they dont work either). The result of all this is that Im getting a brilliant picture but no sound. Just to make sure that the DVD player wasnt faulty, I connected it to the TV using a normal scart connection and everything was fine. Am I missing something or is the equipment faulty? Any help would be much appreciated, especially from those who own Toshiba TVs and/or DVD players.