Hi - wonder if anyone can help me with a slight niggle with my ZT - its a strange one
- so far this occurrence only happens with the 2D versions of a 3D movie: On Captain America ( Winter Soldier )3D, Thor ( The Dark World ) and Man of Steel 3D (the 2D disc versions of the films that come with the separate 3D versions); when the credits role at the end of the movie, at a certain place in the credits, the picture changes and the credits go blurry and superimpose on each other, the icon '3D' appears on the upper right hand side of the screen appears for a few seconds and a couple of seconds later the credits go back to normal on some discs and others i have to press the 3D button on the remote control and select 2D which is strange because the disc itself is 2D
)
I have: Checked the Aspect Selection Mode -16:9, Checked the 3D mode button to make sure its 2D, Checked in Menu of TV for anything i have missed - did the same with the BD player ( Panny BD500 ).
I have set up a second player ( Panny BD310 that i use with my 50VT65 ) - the same outcome happens in exactly the same point in the credits.
Played the same BD disc's on the VT65 + BD310 - smooth as a babies bottom!! it doesn't happen!
the conclusion leads me to suspect the problems coming from the ZT and not the disc or BD players or HDMI cables, as when i tried the BD310 on the ZT i used a different HDMI cable and it still made the credits change - but no problem on the VT.
Please note again - they are the 2D disc versions of the blue rays that have a separate 3D disc as well.
Strange as it sounds a 2D movie such as Oblivion is fine on the ZT.
Any suggestions please
Thanks
saarnold