Will I Aint
Established Member
I found that my 2017 DS1515+ was getting improper shutdowns over the last few days. I had installed more compatible RAM back in 2017 and it's been rock solid since then.
I installed the desktop app Synology Assistant and ran three back to back memory checks each lasting around 4.5 hours so no problem there.
Next I unchecked the "startup after power failure" checkbox and left it overnight. This morning, the box was powered off and the power button was unresponsive, no lights or any signs of life. Seeing as I've got 5 8tb drives installed i'm not too happy as that is pretty much my entire media library.
Hunting around on the web it looks like there are a couple of issues with the DS1515+ including the atom chip issue and resistor failure related to the power button.
Following the vid instructions the I bridged a resistor on the mobo with my multimeter and the fans spun up and the lights were working so it looks like I'm going to be able to fix this.
Just interested if anyone else has had the same/similar issue plus I'll share what happens, parts are ordered but i need a soldering iron with a micro head so waiting on that to arrive.
I installed the desktop app Synology Assistant and ran three back to back memory checks each lasting around 4.5 hours so no problem there.
Next I unchecked the "startup after power failure" checkbox and left it overnight. This morning, the box was powered off and the power button was unresponsive, no lights or any signs of life. Seeing as I've got 5 8tb drives installed i'm not too happy as that is pretty much my entire media library.
Hunting around on the web it looks like there are a couple of issues with the DS1515+ including the atom chip issue and resistor failure related to the power button.
Following the vid instructions the I bridged a resistor on the mobo with my multimeter and the fans spun up and the lights were working so it looks like I'm going to be able to fix this.
Just interested if anyone else has had the same/similar issue plus I'll share what happens, parts are ordered but i need a soldering iron with a micro head so waiting on that to arrive.