cabbie19
Prominent Member
- Joined
- Jan 16, 2009
- Messages
- 4,913
- Reaction score
- 647
- Points
- 839
Hi fellow AVF'ers, looking for any help or ideas regarding Windows 10 install Problems.
Set-up details
Asus Prime Z270-A motherboard
Intel Core i5 6600 (non k)
2 x 4Gb Team Vulcan T-Force DDR4 3000MHz
Samsung PM951 M.2 PCI-e x4 SSD
Onboard Graphics
BeQuiet 630w psu (from my working pc).
Issues
When i try to install Windows 10 the loading files bar runs from left of screen to right, then the circle of dots starts to rotate. after no more than 2 full revolutions the system crashes to BSOD, with a variety of different fault descriptions (different every time).
I have been able boot into Ubuntu from a USB stick although it sometimes scrolls loads of info up the screen instead of going into Ubuntu. Once into Ubuntu, i get occasional system error messages, but it doesn't crash.
This list of issues is not exhaustive, but representative of what generally happens.
What we have tried.....
Memtest86 has been run on each memory module individually without any errors (8 passes on each module)
320gB 2.5" hdd, clean formatted to ntfs install failed bsod
1Tb 3.5" hdd, clean formatted to ntfs install failed bsod
500gB 2.5" HDD CLEAN FORMATTED TO NTFS, Then installed with Windows 10 in my sig rig, removed once basic install complete. Booted to home screen, then locked up 1st time, 2nd time booted to home screen then BSOD.
2280 m.2 drive install failed bsod
BIOS updated to latest version
BIOS re-set to "optimised defaults" each time
Tried in both "other o/s" and "uefi windows" modes
Each memory module tried individually in each of the 4 dimm slots
MA3STRO who i bought the board off has been on video link all afternoon helping with ideas and support, so he will add info to this post when he can.
All questions / suggestions very welcome
Jamie
Set-up details
Asus Prime Z270-A motherboard
Intel Core i5 6600 (non k)
2 x 4Gb Team Vulcan T-Force DDR4 3000MHz
Samsung PM951 M.2 PCI-e x4 SSD
Onboard Graphics
BeQuiet 630w psu (from my working pc).
Issues
When i try to install Windows 10 the loading files bar runs from left of screen to right, then the circle of dots starts to rotate. after no more than 2 full revolutions the system crashes to BSOD, with a variety of different fault descriptions (different every time).
I have been able boot into Ubuntu from a USB stick although it sometimes scrolls loads of info up the screen instead of going into Ubuntu. Once into Ubuntu, i get occasional system error messages, but it doesn't crash.
This list of issues is not exhaustive, but representative of what generally happens.
What we have tried.....
Memtest86 has been run on each memory module individually without any errors (8 passes on each module)
320gB 2.5" hdd, clean formatted to ntfs install failed bsod
1Tb 3.5" hdd, clean formatted to ntfs install failed bsod
500gB 2.5" HDD CLEAN FORMATTED TO NTFS, Then installed with Windows 10 in my sig rig, removed once basic install complete. Booted to home screen, then locked up 1st time, 2nd time booted to home screen then BSOD.
2280 m.2 drive install failed bsod
BIOS updated to latest version
BIOS re-set to "optimised defaults" each time
Tried in both "other o/s" and "uefi windows" modes
Each memory module tried individually in each of the 4 dimm slots
MA3STRO who i bought the board off has been on video link all afternoon helping with ideas and support, so he will add info to this post when he can.
All questions / suggestions very welcome
Jamie