Seleco SVP 310 user manual

Discussion in 'Projectors, Screens & Video Processors' started by Skaning, Apr 22, 2004.

  1. Skaning

    Skaning
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Hi,

    After several emails to Sim2, I now try to get som help from you guys!

    I need the manual for the Seleco SVP 310. Is there someone out there that can help me with this?

    Brg,

    Andreas Scharin
     
  2. Skaning

    Skaning
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Any Seleco 3xx series user manual will work.....

    /A
     
  3. Rob

    Rob
    Active Member

    Joined:
    Jul 17, 2000
    Messages:
    1,286
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    51
    Location:
    Norwich
    Ratings:
    +35
    May be worth sending Chris Frost a PM.

    He is the resident Seleco expert, and might be able to help.

    Regards Rob.
     
  4. ziggypop

    ziggypop
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    The Seleco 350/310 manual is the same one. The diffeences related to the lack of tuner in the 310 and also no amplifier for sound. But the setup, focus and convergence were the same.

    The curent 420 manual (downloadable from SIm2) is also similar. 350 and 420 setup, focus and convergence are almost the same.

    The difference is the memory bank setup. someone correct me if I have missed something or misled, but I am sure you can use the 420 manual to do the setup for the 310 - they read the same for almost all steps.


    cheers

    Bill
     
  5. AndyFov

    AndyFov
    Active Member

    Joined:
    Nov 20, 2002
    Messages:
    1,472
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    51
    Location:
    March, Cambs
    Ratings:
    +45
    I seem to remember that some 350s were different to others. Some you used the remote for deflection only, then had to adjust an array of pots to get the convergence right... On others everything was done by remote.

    Is there something specific you need to know? Have you got the black remote? If so press and hold in the button with three dots, . . . select the installation option and press exit 7 times. That'll get you into the setup menu.

    I'm sure Owl could help you out.
    http://www.owl-video.co.uk/new/contact.asp

    Andy

    Andy
     
  6. Chris Frost

    Chris Frost
    Well-known Member

    Joined:
    Jul 14, 2000
    Messages:
    2,783
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    86
    Location:
    Cheshire
    Ratings:
    +109
    310/320/350 all use pots for convergence. A 4XX series manual would help but wouldn't cover the important differences in enough detail.

    Andreas and I have been in contact. AFAIK he is still chasing Sim2 but we also have a back-up plan.


    Regards
     
  7. Skaning

    Skaning
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    After a week now, I am giving up on trying to contact Sim2.

    Strange that they refuse to answer emails. I have been recommended to call them, but I haven´t got the time to call since I work all the day.

    Thanks for your help though, without that I wouldn´t gone far in my effort to get hold of a manual.

    Chris, thank you! You've got a pm.

    Brg,

    Andreas
     

Share This Page

Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice