1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

screen for a Optoma EzPro745

Discussion in 'Projectors, Screens & Video Processors' started by windowlicker, Jan 26, 2005.

  1. windowlicker


    Products Owned:
    Products Wanted:
    Hello. I am looking for some assistance on a screen for this projector. I am mainly looking for something that is pull down and will not wrinkle. The native rez is 4:3 but it will also do 16:9 and 5:4. The projector will be around 16 feet from the wall on a shelf. This is not a basement room so there will be some external light during the day. I am limited on the brands I can purchase however. I place the order through my work vendor witch happens to be CDW.COM. They have these brands

    • Dalite
    • Bretford
    • Mitsubishi Digital Electronics
    • Draper
    • Quartet
    • Epson
    • InFocus
    • Chief Manufacturing
    • NEC Visual Systems
    • Proxima
    • Plus Corporation

    I was also torn as if I should go with a High contrast grey or high power screen. Da-lite also has something called Video Spectra 1.5 that is 35 degree viewing angle with a gain of 1.5.

    Thanks for any help you can give. Here are the specs of this Optoma.

    Resolution: Native XGA (1,024 x 768), SXGA+ (1,400 x 1,050) compressed
    Brightness (typical): 2,300 lumens
    Contrast Ratio
    (full on/full off): 2000:1
    Weight: 5.3 pounds
    (W x H x D): 10.4 x 4.11 x 9.3 inches
    (265 x 104.6 x 236.4mm)
    Noise Level (typical): 32/27dB (ECO)
    Lamp Type and Life: 200-watt SHP lamp
    5,000 hour
    Aspect Ratio: 4:3 native, 5:4 and 16:9 compatible
    Input Connections: PC/Video:
    15 pin D-sub input (RGBHV/YPbPr input), DVI-HDCP
    One mini DIN for S-video connector
    One composite RCA type connector
    USB Mouse control
    One Audio input for every input- (3.5mm Mini Jacks stereo)
    Output Connections: 15pin monitor output (passive)
    Computer Compatibility: IBM PC and compatibles, Apple Macintosh, iMac, NEC PC98 series, Fujitsu FM Towns, and VESA standards SXGA, XGA, SVGA, and VGA (resizing)
    Video Compatibility: NTSC/PAL/SECAM
    SDTV (480i), EDTV (480p), HDTV (720p, 1080i)

    Throw Ratio: 2.0 - 2.4:1 distance/width
    Keystone Correction: ± 16 degrees
    Remote Control: Wireless remote
    Projection Screen Size (diagonal): 24.6 to 246 inches (8.58 to 0.84 meter)
    Projection Distance: 3.9 feet to 32.8 feet (0.6 to 6.24 meter)
    Projection Lens: F= 2.4~2.65, f=28.04~35.59mm, 1:1.2 Manual Zoom and Focus
    Projection Methods: Front, rear, ceiling, rear ceiling
    Data Loop Through: Passive monitor loop through
    Horizontal Scan Rate: 15 to 100 kHz
    Vertical Scan Rate: 43 to 120 Hz
    Operating Temperature: 41-95°F (5-35°C)
    Power Supply: AC Input 100 ~ 240V, auto-switching power supply
    Power Consumption: 265 watts (maximum)
    <15 watts (standby mode)

    Security: One Kensington key lock port
    Tilt Angle: 7 degrees with elevator mechanism
    IR Receivers: Front and back
    Uniformity: 85%

    Displayable Colors: 16.7 million colors
    Standard Accessories: AC power cord, VGA to VGA, Composite Video

    Optional Accessories: Short Throw Lens
    Ceiling Mount Kit
    15-pin to 3 RCA component/ HDTV adapter / SCART adapter

    Warranty: Two year limited parts and labor, 90-days on lamps

Share This Page