Bill007007
Novice Member
I have a satellite dish antenna (Dish Network) connected to the A input of my A/B switch. I have a Channel Master CM-5020 VHF/UHF antenna coupled with a Winegard HD-9032 UHF antenna connected to the B input of my A/B switch. These 2 antennas are orientated differently. My tv is a Samsung Model UN22F5000AF. With the switch in the B position, I Auto Program with the antenna source set to Air. The scan picks up all my VHF and UHF stations just fine. However, here's the problem: I want to be able to switch to the A position of the switch to watch the satellite dish, but I need to find a way to add Channel 3 to my Channel List. I tried re-scanning with the switch in the A position and with the antenna source set to Auto which gives me Channel 3 , but I don't get all my off-the-air channels. I don't get Channels 13-1, 13-2, 13-3, 13-4 and 21-1, 21-2 and 21-3. There must be a way to add Channel 3 and keep all the off-the-air channels. Thanks for the replies.
