RGB question

Discussion in 'Projectors, Screens & Video Processors' started by phcjpp, Mar 8, 2002.

  1. phcjpp

    phcjpp
    Standard Member

    Joined:
    Jan 29, 2002
    Messages:
    71
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    6
    Location:
    London
    Ratings:
    +0
    Hi,
    I have a pioneer dvd with rgb scart out and a sony lcd projector with rgb inputs (5 of) - is there a cable that coverts between scart rgb and separate 'coax' rgb ?

    Thanks
    Chris
     
  2. DaveP

    DaveP
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    It sounds to me that your projector connections are designed for a PC to connect its VGA connector to. These are not compatible with the DVD RGB!


    DaveP
     
  3. phcjpp

    phcjpp
    Standard Member

    Joined:
    Jan 29, 2002
    Messages:
    71
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    6
    Location:
    London
    Ratings:
    +0
    the projector is a HT10 if that help
     
  4. Electric Mayhem

    Electric Mayhem
    Well-known Member

    Joined:
    Mar 16, 2001
    Messages:
    10,461
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    136
    Location:
    United Kingdom
    Ratings:
    +1,903
    I´ve moved this here as you´ll get more chance of answer (being Projector related)
     
  5. Dangerous

    Dangerous
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    I have a 10ht . You need a scart to 3 phono with sync on green(this is important). Try keene electronics

    Dave
     
  6. phcjpp

    phcjpp
    Standard Member

    Joined:
    Jan 29, 2002
    Messages:
    71
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    6
    Location:
    London
    Ratings:
    +0
    Dave,

    I had a look at the site - a found various cables that might fit your description but nothing mentioned the sync on green as far as I can see.

    Chris
     
  7. phcjpp

    phcjpp
    Standard Member

    Joined:
    Jan 29, 2002
    Messages:
    71
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    6
    Location:
    London
    Ratings:
    +0
    bump sorry.
     
  8. Dangerous

    Dangerous
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Look for "leads to go" then in the window look for "Scart to three phono plugs (RGB with sync on green). You will see this description: Cable type: 3 x URM70 digital coaxial.
    Connector Type: Gold Scart plug + gold bullet type phono plugs
    Typical usage: Scart - RGB sync on green. For DVD to TV - projector etc (no external sync connection). This a Scart plug that has the synchronisation signal taken from pin 19(sync) to pin 11(Green). I originally bought a Scart to 3 phono with a separate composite sync phono, which did not work. After some research I found that connecting pin 19 to pin 11 with a 50-ohm resistor in between that my 10 ht would work of my NTL digital box. It should therefore work off your DVD player.

    Dave
     
  9. phcjpp

    phcjpp
    Standard Member

    Joined:
    Jan 29, 2002
    Messages:
    71
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    6
    Location:
    London
    Ratings:
    +0
    thanks very much - have ordered the part now. Thanks again.
    Chris
     

Share This Page

Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice