PSP gaming help

B

Benarbia

Guest
I have 4.01 M33-2

But FIFA 10, Motorstorm and newer games won't work.

What do I need????
 
If you have a PSP-1000 or PSP-2000 with a non TA-88v3 board. Then download and install this:
XGEN Updater V2 and XGEN Pandora V2 Released | PSP Hacks · PSP Go Hacks · PSP Homebrew, PSP Downloads, PSP Custom Firmware

It will update you from where you are to the latest firmware available 5.50 GEN-b. Fifa 10 will now work. For Motorstorm and some other games that require 6.0 to work go on this link, download it and follow these instructions:
Yoshihiro's 5.55 & 6.00 Games Decrypter Released *Updated* | PSP Hacks · PSP Go Hacks · PSP Homebrew, PSP Downloads, PSP Custom Firmware

1. Extract the EBOOT.INI/BIN (located in GAME/SYSDIR) from the any ISO that you needed to run in this example its Motorstorm.iso

2. To extract it use UMDGEN, open the Motorstorm.iso from UMDGEN then extract the EBOOT.INI/BIN from there save it somewhere that you can actually find the file usaully on the DESKTOP

3. Then connect your psp to USB MODE then copy the EBOOT.INI/BIN file to the ROOT of your memory stick so its like (X:/EBOOT.INI/BIN) X means thats your memory stick well it just a sample

4. Then while your in USB mode copy the DECRYTER TO YOUR PSP LIKE NORMALLY (ITS LIKE INSTALLING ANY CUSTOM FIRMWARE)

5. After you have installed the decryter run the program and it WILL NOW DECRYPT THE EBOOT.INI/BIN FILE THAT YOU PUT ON THE ROOT OF YOUR MEMORY STICK

6. Then after its done go back to USB mode and delete the EBOOT.ini/BIN file from your root directory of your PSP.
& After you have done that locate the FOLDER NAME DECRYPTOR inside that folder there's the newly EBOOT.ini/BIN file that you needed and copy that EBOOT.ini/BIN file to your desktop

7. Then after that open up UMDgen again and open up Motorstorm.iso and DRAG THE EBOOT.INI FILE TO THE GAME AND THEN SAVE THE GAME AS .ISO

8. Then finally after you have save the game as ISO copy the new modified Motorstorm.iso to your psp then it should work %100.


Hope that helps :thumbsup:
 
Last edited:
Ive recently just had the same problem as i was using 4.01 m33-2 on a phat psp1000 the safe way is to go through the updates instead of straight to the newest. so you start with 5.00 m33-6, this takes you to the latest M33 update

you will find this here ( File Details-CFW-5.00-M33-6-PSP - )
you also nee the offical sony update 5.00 and you will find this here ( PSP Downloads | 5.00 Firmware Update )

unzip both files and rename the offical sony update to 500.PBP then put this in the same update folder extracted from the other zip.

to install, put the update folder in PSP/GAME/ on the psp and run
There, now you have 5.00 M33-6

delete the update folder off the psp now

now you have to go from updates gen-a to gen-b to gen-b2

Gen-a Found here ( File Details-Custom-Firmware-5.50GEN-A-Build-4-PSP - )

unzip and put the UPDATE file into PSP/GAME again and run
Done

now get gen-b here and do the same as above and run( File Details-Custom-Firmware-5.50GEN-B-PSP - )

when you have done this check your psp system information and you should see gen-b(full)

now get ( File Details-Custom-Firmware-5.50GEN-B2-PSP-Homebrew-Applications - ) and run as the same as the rest..

now you are done your system information will still say gen-b(full) still as the b2 was just a small update

THIS IS THE BEST WAY AS IVE WITNESSED A BRICKING FROM GOING STRAIGHT TO THE GEN-B2 UPDATE

most games will now work but if not follow the instructions with UMD gen and decrypter and your off......ive now got GT, fifa10, dirt2, NFS, motorstorm all going brilliantly:smashin:
 
Last edited:

The latest video from AVForums

TV Buying Guide - Which TV Is Best For You?
Subscribe to our YouTube channel
Back
Top Bottom