Pro-ject Stereo Box DS, B&W AS1, B&W LM1

Thang

Novice Member
Joined
Sep 13, 2022
Messages
2
Reaction score
0
Points
26
Age
46
Location
Essen, Germany
Very strange problem with signal chain: Pro-Ject Stereo Box DS (mini digital integrated amp 35W 8Ohm/60W 4Ohm) speaker out --> B&W AS1 (subwoofer) speaker in (not subwoofer RCA in) --> B&W LM1. Then no music but very strange statics noise from both AS1 and LM1. Then I tried to disconnect one channel (left or right) from the DS and it worked well, then I connected again keep everything running, then it worked well. When it works I turns off the DS and turn it back on then it has same problem. If I turns off the AS1 and on again, it's still working... Any clue? :D
 
Are the sub & sats something you've bought used? If you definitely have it wired correctly it sounds like a fault. Try the speakers without the sub to rule those out.
 
Thanks Wine Mannfor your response! I’ve tried without sub and it works well. All items in the signal chain were used stuffs. I also tried with another amp and it worked well. So my bet was about the amp: some thing related to digial and overloaded…?
 

The latest video from AVForums

Is 4K Blu-ray Worth It?
Subscribe to our YouTube channel
Back
Top Bottom