I posted this same post in the below thread - and was told to start my own post/thread. Thanks in advance
Btw I have not tried using a hair dryer on the board - but tonight I will - and will update post. Also I will post pictures later to help out.
http://www.avforums.com/forums/plasma-televisions/400763-philips-plasma-blink-18.html
Btw I have not tried using a hair dryer on the board - but tonight I will - and will update post. Also I will post pictures later to help out.
http://www.avforums.com/forums/plasma-televisions/400763-philips-plasma-blink-18.html
hello all - I have a Phillips 42PFP5332D/37 and it gives the single green light than 6 flashing red lights when the power button is pressed. If the power button is not pressed the six red lights will just flash pause and repeat.
I opened the back of the Plasma and was surprised to find that Samsung made the boards. Anyway - can anyone offer some help? I checked the caps and they all seem flush and not broken/popped. I can not seem to find any of the numbered capacitors that other posters have posted to look for.
Heck I can not even find anyone with a similar model number to my plasma...
If it helps I can post pictures of the boards/back of the plasma/anything... and the model numbers from inside the plasma.
Thanks in advice for any and all help