No display : Power supply or backlit strips ?

bloto

Member
Hello everyone,

I'm new here so excuse me if I don't understand everything. I have a Sony TV model KD-70X690E with no display (picture stay black). My concern is how to determine if the problem come from power supply or the backlit led strips ?

I open the TV and confirm on the power supply board that the +5V and +12V are working properly. At the backlit led connector (on the power supply board), the voltage increase on power on from 0 to around 100V within 3 seconds and than decrease rapidly to stabilize at around 32Vdc (after about 5 seconds). According to the service manual, I'm suppose to have around 210 Vdc on that connector.

Unfortunately, I don't have a TV led tester to confirm the good work of the strips

I can order a new power supply, but if the problem come from the led strips, I will buy it for nothing (or vice versa)

Any hint from you on how to pinpoint the problem before ordering parts will be very appreciate.

Thank you
 

The latest video from AVForums

Samsung QN95B 4K QLED TV Review
Subscribe to our YouTube channel
Support AVForums with Patreon

Top Bottom