No display on TV from Marantz NR1510 menus

[Nobulus]

I am unable to get the menus to show on the TV screen.

The TV is connected with both optical and HDMI cables. HDMI-CEC is enabled on the TV but the only sound option is Optical. Pressing the TV Audio button on the Denon remote shows

H=None /D=opt

on the front panel display. I don't know how to change it without the on-screen display

 

[rpr]

Which hdmi sockets are you conncting to on TV and the Marantz? Is there a specific reason your running optical as well as hdmi?

 

[Deleted member 39241]

As above, do you have an HDMI cable connected from the HDMI output of the AVR into an HDMI input on the TV? Make sure both are switched on and the TV is set to the input where the AVR is connected. Press 'Set Up' on the Marantz remote.

 

[gibbsy]

There is only one HDMI out on the back of the Marantz. This should be your only HDMI connection to the TV. Optical is audio IN only.


Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel)

Use an HDMI cable to connect a TV that is compatible with the ARC / eARC function to this unit.
Set “HDMI Control” to “On” or “ARC” to “On” when using a TV that supports the ARC function. link
Using an eARC function-compatible television enables audio playback from the speaker connected to this unit, regardless of “HDMI Control” and “ARC” settings in the menu.

eARC function settings may be required depending on the eARC function-compatible television you are using. Make sure eARC is set to on if this setting exists on your television. For more information, check your television’s owner’s manual.
When an ARC and an eARC function-compatible televisions are connected, the eARC function-compatible television is prioritized.
Use a “High Speed HDMI Cable with Ethernet” when using an ARC / eARC function-compatible television.

back to top

AV Surround Receiver