Neet splitter help needed!

AlanSussex

Novice Member
Joined
Jan 4, 2016
Messages
2
Reaction score
1
Points
26
Age
50
Location
Sussex
I have Sky HD running into a Neet splitter to 2 Samsung TVs (one 5m cable one 1m) and as soon as I change channel on sky or enter the EPG, output 2 from the splitter appears to drop out (as in which ever TV I connect to output 2 suddenly goes blank) and I then have to reselect the HDMI port its plugged into on that TV via the remote and Sky appears again.... Any ideas! The output on output 1 always stays stable, tried swapping outputs to opposite TVs but still does the same just on the other tele! GRRR!!!
Any help greatly appreciated, thank you!
 
Is SKY set to 1080i or 'Auto' video Output format.

Confirm that you have HDMI CEC (Control) disabled on both TV's plus the SKY box.

The Neet 1x2 seems to generate a fair few unique problems - AVF should start charging for support services!

Joe
 

The latest video from AVForums

TV Buying Guide - Which TV Is Best For You?
Subscribe to our YouTube channel
Back
Top Bottom