looking best configuration Sagem HDD50 G4 T

E

eltharin

Guest
Hello,

I would like to know your best setting for a Sagem HDD50 G4 T.
Because i did'nt find the best configuration :

Sharpness, coleur, contrast, clearness, rightness etc...

Thanks for your help .

Eltharin
-------
 

Boris Blank

Active Member
For brightness/black level, display an all black screen, look at the screen from a distance of about 6 inches and adjust the brightness control on the remote until you can't see any of the mirrors moving (these pixels are all tiny mirrors, they will look like greenish grey/dots when moving on a black screen). Once they disappear, black is as black as it can be and brightness level will be correct.

Out of the box, the set is pretty much spot-on for viewing other than contrast and brightness (and even then they are very close, close enough that I suspect the sets are actually being calibrated at the factory). Contrast can be adjusted using one of the test patterns mentioned here http://www.avforums.com/forums/showthread.php?t=196873.

Here's a link to more interesting information on setting brightness and contrast on a DLP http://www.avsforum.com/avs-vb/showthread.php?p=6385482&&#post6385482

Its worth investing in the DVD mentioned to get the correct test patterns.
Paul
 
E

eltharin

Guest
Oki thanks PaulB, but do you give me your setting if you have a Sagem of course ;)

Because i haven t the dvd test.

Sorry for my bad english i m french ;)
 

Boris Blank

Active Member
From memory, brightness was 47, contrast was 50. BUT, you really do need to use a test pattern to get the exact settings for your own set.

Your english is good, certainly better than my French!
Paul
 
E

eltharin

Guest
Thank PaulB,
I test that and i will I hold you inform soon of my setting
 
E

eltharin

Guest
How well adjust colors considering it did not possibility there
of adjust each one?
There is no menu hides or of factory on this model?

Thanks for you help :smashin:
 

Trending threads

Top Bottom