Linn Unidisk SC - Required Interconnect

[YellowSphere]

Currently using a Sony TV with RGB Scart inputs. Looking at the Linn Unidisk SC, which comes in a Scart version, but no-one does it, and need to be absolutely certain how to wire this up before investing. According to the manual, you can output RGB along the component output. This in mind, would any component to Scart cable work for getting a picture into my TV?

 

[MitsiTurbo]

It would, but only if your TV will accept the sync signal on green, which I doubt it will. RGB on scart uses a separate cable for the sync. You will need something like this to get it to work:

http://www.js-technology.com/product_info.php?cPath=22&products_id=52&osCsid=aa47517daa5d5c37cd0b586e4b3877aa

 

[rowlandhills]

I think what the Linn does is to use the composite video output to give the sync, when set to output for SCART (which is a software setting in the player). This assumes that it's the same approach as the Classik Movie which I used to have.

You should be able to use a SCART - 4 phonos lead to get this from the Linn player to the screen. I had one made up by Mark Grant a couple of years ago which cost about £50 for a 1m length. In fact, if I can find it then I should probably try selling it (drop me a PM if you're interested).