Kalibrate's Advertiser Thread - Take a look for information, offers, news etc.

[Rickyj at Kalibrate]

Trade in Emotiva BasX-5175 Power Amp Available. Boxed. Pictures to follow. £795 inc UK delivery

JVC X7000 pre setup. Boxed. £1,995 inc UK delivery

 

[Topmetom 2]

How far behind is a 7000 over a 7900? £500?

 

[Rickyj at Kalibrate]

How far behind is a 7000 over a 7900? £500?

There are a few differences, but nothing major:

- X7000 defaults to gamma D when HDR signal seen. This can be manually overridden, but has to be done after the HDR signal has been received.
- The X7900 uses Eshift 4, but this is just different (debate as to whether it is better than Eshift3).
- The X7900 has a low latency mode for gaming
- The X7900 can use the auto iris with HDR.

I think those are the main differences.

The 1st and 4th points can be worked around with a HDR Fury (and automated if required via the RS232 connection).

 

[Topmetom 2]

There are a few differences, but nothing major:

- X7000 defaults to gamma D when HDR signal seen. This can be manually overridden, but has to be done after the HDR signal has been received.
- The X7900 uses Eshift 4, but this is just different (debate as to whether it is better than Eshift3).
- The X7900 has a low latency mode for gaming
- The X7900 can use the auto iris with HDR.

I think those are the main differences.

The 1st and 4th points can be worked around with a HDR Fury (and automated if required via the RS232 connection).

Thank you, can it be calibrated ?

 

[Rickyj at Kalibrate]

Thank you, can it be calibrated ?

On site calibration would be extra, but I have calibrated the projector off the lens for:

SDR709 (including custom BT1886 imported curve)
REC2020
HDR1200 (with custom HDR1200 curve)
HDR4000 (with custom HDR4000 curve)

Video on the BT1886 curve below:

 

[Rickyj at Kalibrate]

Pictures of the Emotiva BasX A-5175 below:

 

[kenshingintoki]

Hi Ricky, which PSA subs are available? I'm in a 3.5x3.5m room, looking at upgrading to something better than the Arendal 2V.
Looking for those infrasonics ideally. I was looking at the TV18ipal or TV1812. Wasn't sure which would be better.
I also need a miniDSP and mic.
Thanks.

 

[Steve Stifler]

Thank you, can it be calibrated ?

Hi Tom
When I bought my LS10500 from Rickyj I believe he did the same sort of pre-calibration. I've never changed the different settings for BT709, BT2020 SDR and HDR he provided in 1300 hours of use, so I think this is a good option. Later on, you can always get a calibration in situ. Perhaps pick up a Lumagen too
J

 

[Topmetom 2]

If only!

 

[Rickyj at Kalibrate]

Hi Ricky, which PSA subs are available? I'm in a 3.5x3.5m room, looking at upgrading to something better than the Arendal 2V.
Looking for those infrasonics ideally. I was looking at the TV18ipal or TV1812. Wasn't sure which would be better.
I also need a miniDSP and mic.
Thanks.

I believe we have been chatting by email, but if I am wrong, please let me know

 

[mikeysthoughts]

Afternoon Ricky. Do you/would you travel as far as Devon to do a calibration?

 

[Rickyj at Kalibrate]

Afternoon Ricky. Do you/would you travel as far as Devon to do a calibration?

To be honest, it is usually uneconomical for you or for us, as a little to far. Have you tried @Steve Withers. He may be able to help?

 

[Rickyj at Kalibrate]

Due to a client upgrade we have an Emotiva RMC-1 16 Channel AV Processor Available with the original box and accessories, Dirac kit, and optional rack ears.

Contact us for more information.

 

[Rickyj at Kalibrate]

We have a used Epson LS10000 available.

It comes with remote, 2 sets of 3D glasses, and power cable, in its original box

There is 522H on the laser (although we will be adding a few more hours to the laser when we setup before shipping out.

This is a 4K-Enhancement Projector, and supports HDCP2.2, but is not HDR or REC2020 compatible (without using a Lumagen or HD Fury).

Price is £1,749 inc UK postage.

 

[Rawschach]

Just a note to say what a great service Kalibrate provide - Ricky tweaked the projector I bought from him and it looks superb. Very helpful chap as well

 

[Topmetom 2]

Possibly one of the best pictures ive seen from a projector @Peter Parker ! If i could fit it into my living room, I’d have it!

 

[Luminated67]

We have a used Epson LS10000 available.

It comes with remote, 2 sets of 3D glasses, and power cable, in its original box

There is 522H on the laser (although we will be adding a few more hours to the laser when we setup before shipping out.

This is a 4K-Enhancement Projector, and supports HDCP2.2, but is not HDR or REC2020 compatible (without using a Lumagen or HD Fury).

Price is £1,749 inc UK postage.
View attachment 1463495

View attachment 1463491

I still think the Epson LS is an amazing bit of kit and produces wonderful colours. I’m curious at to what movie this image was from?

 

[Prism]

Pretty sure it's Transformers: The Last Knight (2017)

 

[Rickyj at Kalibrate]

Pretty sure it's Transformers: The Last Knight (2017)

Sounds right. Not one we usually use, but was testing the Apple TV 4K at the time, and is one of our films in our library.

 

[Luminated67]

Sounds right. Not one we usually use, but was testing the Apple TV 4K at the time, and is one of our films in our library.

I must say that image did look beautiful.

 

[GrazzaB]

If someone has the space for the LS10000 (it is HUGE) that is an incredible deal. I loved my LS10000, such a great projector.

 

[bigry]

Are the XpanD X105 RF glasses still the best for suing with a JVC N5?

 

[stevefish69]

Hi,

Are you guys still up and running, I’ve DM’s Ricky, filled out the online form and tried calling. Hope everything is ok

I desperately need my Epsom TW9400 PJ calibrated now I’ve finally gone 4k and have HDR

 

[Topmetom 2]

Hi,

Are you guys still up and running, I’ve DM’s Ricky, filled out the online form and tried calling. Hope everything is ok

I desperately need my Epsom TW9400 PJ calibrated now I’ve finally gone 4k and have HDR

I got my anthem from @Rickyj at Kalibrate thursday, so he is still about.

 

[Rickyj at Kalibrate]

Hi,

Are you guys still up and running, I’ve DM’s Ricky, filled out the online form and tried calling. Hope everything is ok

I desperately need my Epsom TW9400 PJ calibrated now I’ve finally gone 4k and have HDR

Sorry Steve, this week has been manic. I did pick up your voicemail, but is one of a few (and emails) that I have not returned yet, sorry.

Not seen the contact form, do you when it was? We do occasionally see contact forms go missing (there are certain restrictions on the contents due to , and as for the PMs. Not been on here for weeks, and just seen I have got a handful of PMs that I had not seen notifications for.

Will come back to you on your PM asap.