how to control 2 shelly RGBW2 from one switch

[RobTi]

Hi atm i have 2 RGBW2 relays one for top and one for bottom LEDs for wall cabinets in the kitchen ( for different colours) and connected to a 3 position retractive centre off switch with L1 & L2 bridged at switch so the lights work on either top or bottom press and i just set the colour from the app. So before i start filling the holes in the wall (for running cables) is there an easier way to control these by adding in another wire from switch to relays and connecting the L1 & L2 terminals and have each of the relays controlled from the switch, like top press turns top on, bottom press turns bottom on and double/long press turns both on ?
Thanks

 

[Seb Briggs]

Yes

l1 and l2 are in essence separate switches so wire them individually to modules with shared common

set switches as momentary

and use io/url to make long press turn both on for l1
And io/url to make long press turn both off for l2

 

[RobTi]

Yes

l1 and l2 are in essence separate switches so wire them individually to modules with shared common

set switches as momentary

and use io/url to make long press turn both on for l1
And io/url to make long press turn both off for l2

Thanks will run an new 3&e in place or the 2&e that will give me an extra wire and follow your advice. Once again many thanks