Epson TW9200 for sale help

Satpalbhai

Established Member
Joined
Jan 7, 2016
Messages
66
Reaction score
5
Points
13
Age
45
Location
West Midlands
Hi guys

Need some help selling my Epsom TW9200, purchased in 2014 from Kent Home Cinema, used 314H since 2014, always been ceiling mounted therefore been touched, is pristine condition and comes with 3 pairs of the original Epson Active 3D glasses and remote and wiring.

I'm due to upgrade to a JVC N7 in the near future. Just wanted your helping finding out how much is this unit worth to sell.

I paid just for £2600 in 2014, so it's a 1080p 3D projector.

I've attached a link below
 

Attachments

  • 16176522313664901018747044870382.jpg
    16176522313664901018747044870382.jpg
    153.6 KB · Views: 65
  • 16176522532165274005501738523690.jpg
    16176522532165274005501738523690.jpg
    99.8 KB · Views: 52
  • 16176522809165812483169045518625.jpg
    16176522809165812483169045518625.jpg
    216.6 KB · Views: 50
There is one for sale in the classified at the moment,your prob looking at around £1k
 
Last edited:
I bought a 9200 off Facebook about a month ago with a 20m HDMI and 3x 3D glasses for 750
 
Thanks smdntn, I will put it up for sale soon, I’m happy with £800 original lamp and always used in eco, also professionally calibrated ready to use
 
Hi guys

Need some help selling my Epsom TW9200, purchased in 2014 from Kent Home Cinema, used 314H since 2014, always been ceiling mounted therefore been touched, is pristine condition and comes with 3 pairs of the original Epson Active 3D glasses and remote and wiring.

I'm due to upgrade to a JVC N7 in the near future. Just wanted your helping finding out how much is this unit worth to sell.

I paid just for £2600 in 2014, so it's a 1080p 3D projector.

I've attached a link below
Going by the photos, I think you are going to need some more clearance at the rear.
The N7 is 19.8 kg. And huge.;)
 
Going by the photos, I think you are going to need some more clearance at the rear.
The N7 is 19.8 kg. And huge.;)
if op is wondering...around 100mm off the rear of n7 is fine... not sure what distance there is between centre of mount to back wall but if op confirms i can let know whats needed on the N7 :) the mount looks like a peerless PRG-UNV ? @Satpalbhai I moved from epson 9000 to few generations back jvc x series and then 2nd x series. the PRG has taken me through with all projectors and on a back wall articulated mount (prgunv-EXA) and had to slide that forward to accommodate the JVC X and then N series ...going between x series to N series didnt have to do much else but yes the JVC is a heavy bugger ! get help to mount it... if can dont attempt on own... something i did but gee quite possible thinking back something could have gone wrong going up the ladder :D definitely dont try on your own to lift above your head !

boy you are going to see quite a step change epson 9200 to n7 ! :D you've skipped forward two gen of JVC I went through and each was a significant step up ! hehe
 
Going by the photos, I think you are going to need some more clearance at the rear.
The N7 is 19.8 kg. And huge.;)
Hi buddy

I will have the N7 hopefully built in the ceiling with a lift, I’ve seen the pics and yes it’s huge lol also read that it produces lots of heat so will have clearance around it, will be running on eco anyways lol
 
if op is wondering...around 100mm off the rear of n7 is fine... not sure what distance there is between centre of mount to back wall but if op confirms i can let know whats needed on the N7 :) the mount looks like a peerless PRG-UNV ? @Satpalbhai I moved from epson 9000 to few generations back jvc x series and then 2nd x series. the PRG has taken me through with all projectors and on a back wall articulated mount (prgunv-EXA) and had to slide that forward to accommodate the JVC X and then N series ...going between x series to N series didnt have to do much else but yes the JVC is a heavy bugger ! get help to mount it... if can dont attempt on own... something i did but gee quite possible thinking back something could have gone wrong going up the ladder :D definitely dont try on your own to lift above your head !

boy you are going to see quite a step change epson 9200 to n7 ! :D you've skipped forward two gen of JVC I went through and each was a significant step up ! hehe
Ha ha I can’t wait, just gotta speak to my AV guy and see if he can install the unit in the ceiling and comes out like a lift, the epson 9200 is 4.3 meters away from the screen and projects 138inch image and that’s what I want the N7 to do, I’ve put in figures on projector central and I think I might be ok with 4.3 to display 138inch image also but will ask my AV guy too.
I was originally going to go for the N5 and save £2k but I haven’t spent anything due to lockdown do I’m treating myself lol
Room is being stripped this weekend, new floors, darker paint, was thinking if I will need another subwoofer behind the sofa, got one in the front, my room is 5.4 long and 3.6 wide (metres), will be upgrading AVR to the new Nad T778 running Dirac, running Kef Q series all around including 2 Kef ceiling speakers fro Atmos.. I know it’s low on lumens compared to my Epson TW9200 so just concerned picture won’t be as bright maybe?
 

The latest video from AVForums

Is 4K Blu-ray Worth It?
Subscribe to our YouTube channel
Back
Top Bottom