Bought this on here a couple of months ago but plans have changed on the speakers I had in mind and I don't need this much power at the moment. I'm sure this amp needs no introduction. Its an absolute beast and will drive nearly any speaker. There is still warranty left until November 2017 which can be transferred to the new owner. This is a collection only sale. Price is firm so no offers. Full specs below. Topology: Fully discrete, dual differential, high current, short signal path Class A/B amplification with Optimized Class-H™ power supply topology. Number of Channels: 5 Power Output (rated power; THD < 0.1%): 400 watts / channel (x5); all channels driven; into 8 Ohms. 600 watts / channel (x5); all channels driven; into 4 Ohms. 500 watts / channel (x2); two channels driven; into 8 Ohms. 750 watts / channel (x2); two channels driven; into 4 Ohms. 575 watts / channel (x1); one channel driven; into 8 Ohms. 1100 watts (1 .1 kW) / channel (x1); one channel driven; into 4 Ohms. Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + /- 0.01 dB. Minimum Recommended Load Impedance (each channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads per channel). Frequency Response: 10 Hz to 80 kHz (+ 0 / - 1 dB). THD + noise: < 0.015% Signal to Noise Ratio (8 Ohm load): > 93 dB at 1 watt (A-weighted). > 109 dB at rated power (A-weighted). Damping Factor (8 Ohm load): > 500 Speaker Output Connections: Super heavy duty audiophile speaker binding posts - with clear acrylic insulators and heavy duty gold plated contacts; designed to accept heavy-gauge bare cables, lugs, or banana plugs. Power Supply: 3.3 kVA toroidal power transformer. 180,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.875 V Gain: 29 dB Input Connections: Unbalanced (Tiffany style, audiophile quality, gold plated RCA); one per channel. Balanced (XLR); one per channel. Each input may be independently switched to either unbalanced or balanced. Input Impedance: 47 kOhms (unbalanced). 22 kOhms (balanced). Trigger: Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (user selectable). The XPR-5 requires a 20 Amp circuit and standard IEC 20 Amp outlet (which is different than a 15 Amp outlet).If you don’t have a proper circuit and outlet, we recommend you have one installed by a qualified electrician.We recommend that the XPR-5 be plugged into its own dedicated 20 Amp circuit. Protection: The XPR-5 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs on one or more channels of the XPR-5, the LED above the Standby button, and the Channel Status LEDs and the LED Bargraph Meter LEDs associated with the channel that is reporting the fault will flash red. Returning the XPR-5 to Standby or switching off the AC Power will reset the protection circuitry. Dimensions: unboxed: 17" wide x 9.5" high x 19.5" deep (includes feet and binding posts; requires additional 3-4" of depth clearance to accomodate the power cord). (double) boxed: 27" length x 25" width x 16" height Weight: 94 lbs (net); 108 lbs (boxed) Price and currency: £1060 - £1000 Delivery: Goods must be exchanged in person Payment method: Bank Transfer. PPG Location: Derry / County Donegal Advertised elsewhere?: Not advertised elsewhere Prefer goods collected?: I prefer the goods to be collected ______________________________________________________ This message is automatically inserted in all classifieds forum threads. By replying to this thread you agree to abide by the trading rules detailed here. Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via private conversation to each other after negotiations are complete and prior to dispatching goods and making payment: Landline telephone number. Make a call to check out the area code and number are correct, too Name and address including postcode Valid e-mail address DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.