1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DMR E55 / PW6 Blocky Picture Problems

Discussion in 'Blu-ray & DVD Players & Recorders' started by AxxxxA, Feb 13, 2005.

  1. AxxxxA

    AxxxxA
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Hi guys, can anyone help.

    History
    I have a panny pw6 plasma with sky digital and a recently bought panny e55 DVD recorder, I have installed it as per the recorders instruction i.e. scart from skys VCR connection to the recorders AV2 connection and a scart from the recorders AV1 to a RGB to VGA converter into my Panny pw6 VGA connection. all connections are turned on as RGB and I have used good quality Thor scart leads, fully fired.

    Now for the problem
    Since the recorder has been installed the picture quality seams to have gone down hill, all the images on screen now seam to be slightly blocky around the edges (not really bad but just enough to be annoying) it is especially noticeable on the shopping channels were the text is constantly on screen. I have tried playing with the settings of the TV an recorder but I cant get my head round what could be wrong as it seamed ok before the DVD was installed.

    Any help would be most welcome.

    Thanks
    Matt………
     
  2. JayCee

    JayCee
    Well-known Member

    Joined:
    Jan 20, 2004
    Messages:
    19,744
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    136
    Location:
    Lanarkshire
    Ratings:
    +1,876
    I know you state all connections are set to RGB but in reality you're not watching in RGB. The Sky digibox only outputs RGB via the Tv scart...which should go into the AV2 scart on the DVDR with it's AV1 scart going to the Tv
     
  3. hornydragon

    hornydragon
    Well-known Member

    Joined:
    Dec 19, 2001
    Messages:
    28,293
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    136
    Location:
    Somewhere near the M4 most of the time......
    Ratings:
    +1,215
    try SKY(TV scart set to RGB)>E55(AV2 set to RGB)>plasma (via component setr AV to component)
     
  4. AxxxxA

    AxxxxA
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    hi, thanks for the reply, i have re-checked the cables and it is allready plugged into the TV scart connection on the sky box. being out put as an rgb signal.
     
  5. AxxxxA

    AxxxxA
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    hi hornydragon.

    i assume by the last bit you mean change the component setting on the tv from rgb to component, if this is the case then all that happens is the screen goes pink. i dont have a component board on the tv only 2 scart boards and the standard vga connection which it is currently connected to.
     

Share This Page

Loading...