1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Digisender X400/Gold

Discussion in 'Televisions' started by Homer_J, Sep 5, 2005.

  1. Homer_J

    Homer_J
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Hello All,

    First post on this forum and I hope this is in the right place.

    I have recently purchased the Digisender X4/Gold and have it setup to distribute the signal from my Sky+ box from a first floor bedroom to a summer house in the garden.

    The unit is advertised with a 100 metre range and the distance between the 2 units is probably in the region of 30 to 40 metres with 2 walls.

    Now, I can receive the signal/sound and control the Sky+ box remotely but the problem I have is picture degradation.

    I have switched off my WiFi but this has made little difference.

    Is there a standard 'Guide' to getting the best out of a Digisender or does anyone have any thoughts on solutions etc.

    Kind regards,

    Homer J
     
  2. JayCee

    JayCee
    Well-known Member

    Joined:
    Jan 20, 2004
    Messages:
    20,087
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    136
    Location:
    Lanarkshire
    Ratings:
    +1,914
    The distance may be the problem as these figures claimed are often wildly exagerated and usually means in free space with no obstructions between.
    As an experiment try moving the remote TV closer and see if it improves.
     

Share This Page

Loading...