denon 2805 12v trigger help please

mojorider

Standard Member
I have purchased some Kef speakers which are powered off a 12v trigger which is great but I dont have a clue how to physicaly set this up.

The manual tells me how to activate the 12v trigger but not how to wire so I am stuck.

I know I need two connections to the KEFS whic are labeled 12v and 0v, bot these are wired and the ends down at the amp via a cat 5 cable.

So i have two wires 12v and 0v and a jack (stereo) which i think is correct but dont know what to do now. The jack is 3.5mm and has three places I can solder to.

so what do i do? solder the 12v to on and the 0v to the other then plug into the amp? Does it make any difference where I solder, do i have the right type of plug?

irritating becase so close but cant complete the job and no one seems to know the one bit regarding the jack so please help.
 

The latest video from AVForums

LG G1 OLED EVO Review (OLED65G1)
Subscribe to our YouTube channel
Support AVForums with Patreon

Top Bottom