Covering In ceiling Speakers

Rudimenz

Standard Member
Hi,
Moving house and want to take along my Kef in ceiling speakers but will be left with a few holes to now cover up in the ceilings . I have 3 x Kef CI200QR (hole size about 11.3 inch) and 9 x Kef CI160QR (hole size about 9.3 inch) so decent hole sizes in the ceiling both downstairs and upstairs. Can anyone recommend a DIY way to fill these holes once speakers are removed? Alternatively are there any decent grills/ dummies out there I could buy to cover these holes instead?

Thanks

Rudy
 

kevin7sub

Active Member
Get some 2 by 1, cut 2 or 3 inches longer than the diameter of the hole. Insert into the void with adhesive on either end so it sticks down onto the inside of the ceiling. You can then cut plaster board to fit the hole and fix to the batten you have created with dry wall screws. Fill, sand and paint and your done. Or alternatively buy some cheap or second hand in ceiling speakers and fill the holes that way.
 

The latest video from AVForums

AVForums Movies Podcast: Streaming Theatrical Releases And The Future Of Cinema
Subscribe to our YouTube channel
Support AVForums with Patreon

Top Bottom