1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Connecting my new T.V - HELP:-)

Discussion in 'Cables & Switches' started by Hirsty, Dec 29, 2002.

  1. Hirsty

    Hirsty
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Having my new Panasonic PL4 delivered today as well as Pan 302 DVD player and a Pan 630 VCR!

    Pan PL4 = 2 Scarts, 1 RGB
    Pan 302 DVD = 1 Scart RGB
    Pan 60 VCR = 2 scarts

    I also have a sky digibox with two scarts, I persume the output is RGB!

    Whats the best setup I can achieve by getting RGB from DVD and Sky?

    And also where do I plug the areial cables? into the video? As i want to be able to record from the video and sky!

    Please Help me, cheers !
     
  2. Dangerous

    Dangerous
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Hi Hirsty
    Here are my suggestions:
    1. Sky Digibox Scart (To Vcr) to Vcr in.
    2. Vcr Scart (Vcr out) to PL4 (Scart 2)
    3. Rf co-ax ( From aerial) to Rf in on Vcr.
    4. Rf co-ax out (From Vcr) to Rf in on Pl4.
    5. Dvd Scart to Pl4 (Scart 1).
    As you only have 2 Scarts on the PL4 you will not be able to connect the Sky Digibox directly to PL4. This I think will necessitate the need to have the VCR on to enable you to watch Sky.
    If you want to use the RGB signal on the PL4 you will need to connect the DVD player to Scart 1 on the PL4.
    The only way that you will be able connect the Sky digibox directly to the Pl4 is if you do not connect the DVD player via Scart and use an s-video connection to the PL4 and connect the audio out from the DVD player to an amp via line out.
     

Share This Page

Loading...