Hi. I have just attempted to connect a DVD player to the PW7 mediabox using new Component cables. Now, these came with screw tops on near the tops that had the red/blue/green colour coding. I attempted to connect the first of these but it simply would not go onto the corresponding connector on either the DVD or the Mediabox. So i screwed the top part off revealing the gold connector part underneath. This slid onto the connector fine. I did the same with the other 5 connectors, noting the colour of the top each time and I believe I got em in the correct sockets (without the screw off covers I cannot tell which is which). I then noted that I could screw back on the cover and just not tighten it and the cables slid over the component connectors fine also. However, when I turned the Mediabox and dvd back on I can hear the sound of the DVD fine but the AV4c channel on the Mediabox picks up no signal. Hmm...so I then reversed the two end cables (Green and Red) on one end to see if I may have got em wrong. Still nothing. Note that the DVD player works fine using SCART. What are my options here? I'm confused and a bit frustrated at the thing now.