Afternoon. I have a need for some advise... Equipment involved: Panny PWD6 42" panel Panny TY42TM6T scart terminal board Panny TY42TM6y Component terminal board DVD player -------------------------------------------- I have a CI with the panny on the brick chimney breast, with 2x 4-core video multi cables. The cables are terminated with BNCs. One set are feeding the Prog scan from DVD into the 6Y board. Currently the spare core on the first cable is PAL from sky to the PAL i/p of the 6Y board. This leaves 4xBNCs & scart board in the Panny. I have tested the DVD and panny with generic 21pin scart lead - no probs... I have constructed 2 adapters with RGB & PAl(sync), scart - 4x bnc. I cannot find a way to swith over to RGB. I know that if I carry pin 16 from DVD scart to the Panny, the 4V will switch, but as is a CI, a really dont need to be running more cable through 2 walls! I have tried to send pin 16 on the Panny high (5.7V) locally (grounded to pin21 chasy earth)..., but this just upset the picture and over 30 secs, bleached out the picture completely. The menus will not give me the option of which source I want to view so I'm stuck with PAL till I can get this to work. I hope someone has experience in this, cos this will save me next weekend hitting my head against a brick wall! Thanks in advance... Gareth.