Got a new TV, JVC AV32R4S 3 scart, and a new Pioneer DVD/HD recorder, DVR-420H. The recorder has two scarts the second being a pass through. I first tried: tv == scart == dvdrecorder == scart (dvd passhthru scart2) == sky box ( TV scart connection) and connected RF from aerial == dvdrecorder == TV RF This gave desired operation until a timed recording kicked in, i.e. when the recorder came off standby I could not see the SKY channel on the TV, all I could see was RF TV and the DVD recorder channel. I then tried: tv == scart == SKY == scart (sky vcr socket to dvd scart1) == DVD Recorder and connected RF from aerial == dvdrecorder == TV RF This now allows me to see SKY when recording BUT I now cannot record SKY because the DVD Recorder cannot see the SKY channel ! I tried selecting L1/L2 on the recorder and cycled thru all available channels on the recorder. I have now had to do the second option above but connect RF from aerial to SKY and then SKY to dvd recorder. This allows me to rec ord SKY but as its from the RF it is in mono only! Any ideas?