1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

can't adjust the red convergence

Discussion in 'Televisions' started by lee24, Jun 24, 2005.

  1. lee24

    lee24
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    I have a Toshiba 43vj22p and I can't adjust the red convergence horizontally even in service mode. I have restored the convergence in design mode, but the red still hasn’t moved.
     
  2. lee24

    lee24
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    thanks for the reply
    I'll add the question to the general tv forum now.

    I can adjust the blue, both horizontally and vertically and the red vertically.
    but the red won't move horizontally.
     
  3. LV426

    LV426
    Administrator Staff Member

    Joined:
    Jul 14, 2000
    Messages:
    12,756
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    166
    Location:
    Somewhere in South Yorkshire
    Ratings:
    +4,909
    Moving.....
     
  4. AndrewGroves

    AndrewGroves
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    Hi Lee,
    This is the same problem I have with a 40WH Toshiba.
    It is the blue that will not move in the horizontal plane.
    Did you get any horizontal movement from the cross in S-Mode or D-Mode?
    I didn't :rolleyes:


    :clap: I took the back off and (On the convergence board) both the Heatsinks for STK ICs were warm to the touch.
    This makes me think the problem lies with perhaps a transistor or the coil on the tube neck?

    I was wondering what would happen if one were to substitute the convergence wires for one another on the board - say swap the blue and red plugs and see the problem shifts to respective colour?
    Would this be advisable?
     
  5. lee24

    lee24
    Guest

    Products Owned:
    0
    Products Wanted:
    0
    Ratings:
    +0
    I don't get any horizontal movement from the cross in S-Mode or D-Mode.
    As for changing the wires around. i dont no much about tv's so i couldn't say.
     

Share This Page

Loading...