bigfecker
Established Member
- Joined
- Jul 23, 2003
- Messages
- 622
- Reaction score
- 31
- Points
- 211
- Age
- 49
I've been using a Cablesson HDMI splitter for a while but recently without any change to hardware or setup its intermittently not routing the HDMI signal on power on of TV/AMP/SkyHD box.
The only way to get it to route the signal is pull the power wire out and plug it back in once all the kit has powered on.
I have it set up as:
Sky HDMI out to Splitter
HDMI cable from splitter to LG TV in Dinning Room
HDMI cable from splitter to Yamaha AV Receiver which then routes to Panasonic TV
The signal always routes to the LG TV without issue but is intermittent to the Yamaha AV Reciver/Panasonic TV
Power to splitter is permanently on expect when I have to unplug to get it to route the HDMI signal.
Any ideas what the issue could be?
The only way to get it to route the signal is pull the power wire out and plug it back in once all the kit has powered on.
I have it set up as:
Sky HDMI out to Splitter
HDMI cable from splitter to LG TV in Dinning Room
HDMI cable from splitter to Yamaha AV Receiver which then routes to Panasonic TV
The signal always routes to the LG TV without issue but is intermittent to the Yamaha AV Reciver/Panasonic TV
Power to splitter is permanently on expect when I have to unplug to get it to route the HDMI signal.
Any ideas what the issue could be?