I think I know what you are saying - the way I see it is - connect both speakers and sub high level to binding posts on amp - right?
But i have another question that i have also asked BK for some advice as follows
quote
"Hi, can you help me with a setup situation. My setup is as follows,
AV AMP – Denon AVR1907
Integrated Amp – Harmon/Kardon HK970
Mission Fronts, Rears & Centre
XLS200 Sub (of course)
Now, I currently have the sub connected to the avr via the phono lead to low level and sub out.
I will be connecting my BK sub to the integrated via the high level Neutrik to the binding posts on my amp along with the Mission fronts as per the manual.
The integrated will be connected to the avr via the available pre-outs on the avr.
When in “movie” mode/5.1 (avr & integrated switched on) do I need to remove either of the connections? I assume the feed to the sub will be from the avr which, is also feeding the fronts via the pre-amp/integrated if you know what I mean! Therefore theoretically the sub will get signals from both the fronts & the avr!
Any help would be appreciated.
Thanks again
Nigel,"
End quote.
Call me silly but I think this may cause phasing problems unless someone can explain to me the right route,