Leumas_10
Prominent Member
- Joined
- Jun 6, 2008
- Messages
- 2,148
- Reaction score
- 168
- Points
- 302
- Age
- 36
I'm currently sorting out the cabling I need for a living room set-up. Looking to lose the cables in the walls so not wanting to forget about something! Any input on this would be appreciated..
All equipment to be fed into an Onkyo TX-SR606 and then out to a tv and also a projector (benq w1070)
PS3 - HDMI - Amp
Oppo BDP-80 - HDMI - Amp
Sky+HD - HDMI - Amp (I want to use the TV speakers for normal TV viewing when the amp isn't on. But use the amp and 5.1 for TV films and football etc on the projector so do I just run Optical or Coax from the sky box to the amp and let it passthrough the signal when on standby? Confused on this one)
5.1 system fed into the amp.
Then split the HDMI output of the amp with something like a Neet splitter and feed the TV and projector.
Also I'm not overly fussed about 3D but seeing as the projector supports it I feel like I should at least try to set-up to include it, neither my blu-ray player or amp support 3D but I may add a PS4 to the set-up soon. So would it be possible to run HDMI from PS4 direct to projector for the 3D video (bypassing the amp for video) and optical from PS4 to amp for the audio?
Am I missing anything obvious? Any advice would be great, cheers
Sam
All equipment to be fed into an Onkyo TX-SR606 and then out to a tv and also a projector (benq w1070)
PS3 - HDMI - Amp
Oppo BDP-80 - HDMI - Amp
Sky+HD - HDMI - Amp (I want to use the TV speakers for normal TV viewing when the amp isn't on. But use the amp and 5.1 for TV films and football etc on the projector so do I just run Optical or Coax from the sky box to the amp and let it passthrough the signal when on standby? Confused on this one)
5.1 system fed into the amp.
Then split the HDMI output of the amp with something like a Neet splitter and feed the TV and projector.
Also I'm not overly fussed about 3D but seeing as the projector supports it I feel like I should at least try to set-up to include it, neither my blu-ray player or amp support 3D but I may add a PS4 to the set-up soon. So would it be possible to run HDMI from PS4 direct to projector for the 3D video (bypassing the amp for video) and optical from PS4 to amp for the audio?
Am I missing anything obvious? Any advice would be great, cheers
Sam