Arcam AVR300 + Infinity Kappa 400

[jonas.bjorck]

I was wondering how i should set my AVR300, the speakers are 6ohm & on my AVR300 i got to choose from 4 or 8ohm. Today im using 4ohm but im curious if this is right?

 

[Johan]

I think (if my memory serves me right) in the user manual it says to set it to 8 ohm if speakers are more than 4 ohm (don't have my user manual handy here so check it yourself but it is mentioned in there with loads of other useful info!)

 

[melson]

I just took a look at the manual and it says if they are 6 ohms or less set to 4 ohms...if higher than 6 set to the 8 ohm setting......Hope this hellps....