Anyone with Dreambox...

tony_park

Active Member
Hi,

can anyone that is using a Dreambox, please issue the following urls and report back their results - especially interested if you are using the Nabilosat 0.8 image:

http://x.x.x.x/web/getcurrent
http://x.x.x.x/web/about
http://x.x.x.x/web/deviceinfo

Please replace x.x.x.x with your ip address for your dreambox.

I think I have a problem with mine responding in time for the TVSource software and MC, so I get no tv signal problems or encrypted channel messages - followed by the channel appearing...


Thanks
Tony
:lease:
 

GaryMo

Well-known Member
I'm not using that image but all URL's are reported as broken, even after replacing x.x.x.x with the IP address of my Dreambox.
 

Niteman1969

Novice Member
Working fine here with nabilosat 0.11
I have xx the mac address in the replies...

reply of getcurrent

1:0:1:18AC:7FD:2:11C0000:0:0:0: BBC FOUR BSkyB 720 576 720x576 5301 5300 5300 265 5303 2045 2 6316 48430 †Roman Polanski - Wanted and...‡ ...Desired: Storyville. Documentary reopening the controversial case of Roman Polanski's conviction for having unlawful sexual intercourse with a minor some 30 years ago. Contains adult themes. 1255386300 4935 48439 †Rich Man, Poor Man: A Knight's...‡ ...Tale. 1/2. Documentary looking at how businessman and benefactor John Madejski comes to terms with his troubled past ahead of a knighthood. Contains some strong language. [AD,S] 1255391700 3600

reply of about

HEAD-Jul 3 2009 dev-2009-06-27 1.5rc1 None dm800 00:09:34:xx:xx:xx False 192.168.0.100 255.255.255.0 192.168.0.1 Tuner A Alps BSBE2 (DVB-S2) BBC FOUR BSkyB 720 576 720x576 5301 5300 5300 265 5303 2045 2 6316

reply of deviceinfo

HEAD-Jul 3 2009 dev-2009-06-27 1.5rc1 None dm800 Tuner A Alps BSBE2 (DVB-S2) eth0 00:09:34:xx:xx:xx False 192.168.0.100 192.168.0.1 255.255.255.0
 

boez

Novice Member
Tony

I'm using 2xDVBViewer/Hadu and DVBLink with Windows 7 MCE and a DM500 running newcs/CCcam and get 100% decryption. I've checked the newcs webserver and found it 100% success rate. (Now if only I could get channel change reliability at 100% I'd be a happy man!).

However, when I tried out the TVSource in the same configuration I cannot get decryption to work at all! I've tried Acamd and Hadu and no go. The logs show that both appear to be asking and getting correct DCW data but TVsource just seems to be ignoring it. I notice in the DVBLogic forums that the admin will not entertain Q's about soft CAMS so I've parked it for now.

Back to DVBViewer setup, I've setup two batch files to stop/start DVBLink Server and configured Windows 7 to run these as scheduled tasks at 4:00am. I'm hoping this will stop the overnight hangup I have been experiencing. If this works I can pass on the very simple batch files (in fact from another forum it appears you may have them!).

Andy
 

tony_park

Active Member
Thanks guys,

glad to see I'm not the only one - this looks like its possibly a problem with the dvblogic software, since it seems to try and get details from these pages...

Fortunately, using TVSource, I just get a slight delay these days, occasionally will get a message flash up about encrypted channel, then the program appears... Hopefully when the next beta is released, this could be resolved

Tony
 

tony_park

Active Member
Tony

I'm using 2xDVBViewer/Hadu and DVBLink with Windows 7 MCE and a DM500 running newcs/CCcam and get 100% decryption. I've checked the newcs webserver and found it 100% success rate. (Now if only I could get channel change reliability at 100% I'd be a happy man!).

However, when I tried out the TVSource in the same configuration I cannot get decryption to work at all! I've tried Acamd and Hadu and no go. The logs show that both appear to be asking and getting correct DCW data but TVsource just seems to be ignoring it. I notice in the DVBLogic forums that the admin will not entertain Q's about soft CAMS so I've parked it for now.

Back to DVBViewer setup, I've setup two batch files to stop/start DVBLink Server and configured Windows 7 to run these as scheduled tasks at 4:00am. I'm hoping this will stop the overnight hangup I have been experiencing. If this works I can pass on the very simple batch files (in fact from another forum it appears you may have them!).

Andy
Hi Andy,

I have TV Source up and running with HADU, no major problems with it.

Tony
 

jemelly

Standard Member
Hi Tony,

How did you get Hadu working with TVSource? I've created a folder called Plugins within the source folder but i still get service is scrambled.

Thanks

Hi Andy,

I have TV Source up and running with HADU, no major problems with it.

Tony
 
Last edited:

tony_park

Active Member
Hi,

in order to get the plugins working, create the directory Plugins under each TVSource tuner definition.

Place your hadu.dll and hadu.ini files, and then you need to find a copy of the file CSA.dll, I found it in software SoftCSA, this also needs to be placed in the directory.

So long as your hadu.ini worked correctly with DVBLink for DVBViewer/DVBDream etc, it will just work with that setup (or at least it did for me)

Hope that helps, if you need a copy of the dll, let me know.

Tony
 

boez

Novice Member
Good news is that with the DLL it is working.

Bad news is the same issue as you Tony, change to an encrypted channel takes several seconds (longer than DVBviewer) and mostly causes a brief 'Channel is encrypted...' error to flash up. I wonder if there is a registry setting in MCE to delay how long before this message is shown?

Andy
 

paulm187

Novice Member
I'm running DVBViewer + Flycccam and no problems at all. I got page not found errors when I tried the links you posted but everything running as sweet as a nut.
 

tony_park

Active Member
Hi Paul,

beta 2 of TVSource is running a lot better for me on the whole with regards to changing channels - now back to sub 2 seconds.

Unfortunately I've had problems with a couple of test recordings about 15 mins in receiving low signal warnings - I have a thread open on this on the dvblogic forums... in recent tests I've not been able to replicate, thats waiting until its one of the wifes recordings, just so she can give me more bruises!

Tony
 

The latest video from AVForums

Podcast: Marantz SR7015 & NAD T 778 AVR + Mission LX2 MKII Speaker Reviews, AV & Film News and More
Top Bottom