Access V+ settings via reset button

Supra_ed

Established Member
Joined
Oct 19, 2006
Messages
258
Reaction score
16
Points
62
Hi all,

I know there is a way of getting into the settings of the V+ box using the reset button and holding down another button, does anyone know what buttons need to be pressed? I've lost my picture signal somehow, its not on HDMI or SCART :mad: Muppet.

Cheers.
 
You may have changed it over to component but you can choose the output during a reboot as follows:

Hold in the Stop and Play/Pause buttons on the front panel, and press Reset.
Keep Stop and Play/Pause held in until the display says 'boot'.
After a few seconds the display should say 'outpt'. Press the Fast Forward button several times until the display says 'Sd' (might also show Scart, so choose your output), then press OK.
Wait for the V+ to reboot.

Then hook up over scart and set it up in the settings as normal for what you want.
 

The latest video from AVForums

Is 4K Blu-ray Worth It?
Subscribe to our YouTube channel
Back
Top Bottom