Building a PC in work and have been running 3d Mark 2001 and the system crashes back to desktop after about 6 hours intermittantly. Processor is Xp 2500 with 2x Winbond 3200 256mb and softmodded 9800 AIW. Clock is set to 190 and Ram timings set to Optimal within Bios. I cannot get this set up to go above 190 without crashes to desktop during 3D mark on first run so set to conservative 190 but still occasional problems. Running at 42 underload. Does anyone have any advise for me ie Bios settings etc that can help me push this performance up and hopefully provide stability. I am very new to this type of board and dont really understand all the settings within the Bios. Dividers/ AGP FREQ/ Ram timings are all very alien to me. Would really appreciate some help as the computer is for a Christmas present for someone. Current 3D mark 2001 is around 15K with 3D Mark 2003 comming in at 5300 with no overclocking of the AIW. Look Forward to some advice on this excellent motherboard.