13A or 3A Fuse?

[S3rv3d]

I have set up my pio 436xde today and i mixed up the cables i am unsure if the 13A goes with the panel or the media box? Not sure if it matters but could people check to see which they have plugged into the panel and the media box.

 

[frank-e-boy]

You will need a 3A fuse in both. Neither of them will require anywhere near a 13A fuse.

 

[chaparral]

43" Plasma Display, Model: PDP-436PE = 292watt (0.4 W Standby)

Media Receiver,ModelDP-R06XE = 25watt (0.7 W Standby:Aerial Power Off)

 

[S3rv3d]

43" Plasma Display, Model: PDP-436PE = 292watt (0.4 W Standby)

Media Receiver,ModelDP-R06XE = 25watt (0.7 W Standby:Aerial Power Off)

Sorry? i have read that in the manual but dont see which needs what though.

Also i am just using the cables which came with the panel and receiver, so surely one must pair up with each

 

[chaparral]

Sorry? i have read that in the manual but dont see which needs what though.

13amp fuse for plasma panel plug..

And 3amp fuse for media receiver plug..

 

[Motoberg]

43" Plasma Display, Model: PDP-436PE = 292watt (0.4 W Standby)

Media Receiver,ModelDP-R06XE = 25watt (0.7 W Standby:Aerial Power Off)

Display current
W = V x I
292 = 240 x I
I = 292/240 = 1.217 amps

Receiver current
25 = 240 x I
I = 25/240 = 0.104 amps

HTH