1. Join Now

    AVForums.com uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

10ht+Denon2800="HELP"

Discussion in 'Projectors, Screens & Video Processors' started by laurie, Dec 6, 2001.

  1. laurie

    laurie
    Standard Member

    Joined:
    Nov 23, 2001
    Messages:
    145
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    16
    Location:
    Sydney Australia
    Ratings:
    +0
    Guys
    has anyone with this combination managed to set it up using Avia the setting for contrast can go all the way up to 100 on the white test patten and still can see the moving bars!!

    worse still the denon 2800 has its own settings so how do you first calibrate the denon contrast,bright,sharp,gamma, that is supposed to be used to calibrate the 10ht....if its out then the pj will not be correct but if I use my normal tv to calibrate the denon where do I put it settings to!! I give up

    cheers Laurie
     
  2. Roland @ B4

    Roland @ B4
    Active Member

    Joined:
    Apr 11, 2001
    Messages:
    2,238
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    51
    Location:
    Reading.
    Ratings:
    +32
    You should be able to both the black and white moving bars.

    I would leave the Dennon on it factory settings unless you can not achieve the correct settings on the projector.

    Make sure the IRE setting on the dennon is set to 0 rather than 7.5
     
  3. jason t

    jason t
    Active Member

    Joined:
    Mar 4, 2001
    Messages:
    1,569
    Products Owned:
    0
    Products Wanted:
    0
    Trophy Points:
    48
    Location:
    kent
    Ratings:
    +38
    hi laurie dont mean to offend but are you sure you are going the right way with the settings on my sanyo plv30 i had to lower the contrast with my denon!!!!

    if you still have problems try emailing paul cavelle he has that combi

    jason
     

Share This Page

Loading...