marantz sr7010

I'd like to try to set up a simple system where the remote from my LG C9 can turn on my Marantz SR7010 to play the audio from the internal TV tuner and apps. Thanks to some help on another thread that I started, I have got the TV reconnected to the SR7010 by optical cable, and the sound is very...

I've carelessly managed to break the little doors off BOTH of the optical inputs on my Marantz SR7010 and am trying to work out the best approach. I only use optical to take the sound from my LG C9 because ARC doesn't work. The optical signal still works but only when I physically hold the...

Hi, I am currently upgrading my home cinema system. I now have Marantz SR7010 plus Monitor Audio Silver line of fronts, center, rear, and subwoofer speakers. I am planning to upgrade my speakers to Canton Reference 5K series - with 5K fronts, 9K rears, 50K centre and 50K sub. To really get most...

Hello, I have a 4 year old Marantz SR7010 which I love to bits, but also am having some issues with. I'm hoping anyone can point me into the right direction to get this problem fixed. This problems exists from time to time. It's there a couple of times a day, and sometimes it's non-existent...

Hi Everyone It's with huge regret to posting that my beloved Marantz SR7010 receiver has placed itself into "Protection Mode" having issued no prior warning or shown symptom of failure or fault. I've removed all cables except for power, and followed the online reset procedure to no avail :(...

Hi I have been toying with selling my 7010 but I don't see lots of improvements in more recent models. My big issue is that I can't connect my 7010 to the internet. I have no idea why. Wired, I can see the IP address. I login on my PC and can see most things. I try wireless and get OK for...

Due to the failure of the All-in-one system in my living room I am considering buying a replacement for the Marantz SR7010 in my cinema room so that it can moved over to the living room. Most likely going for another Marantz as very happy with it. Obvious choices are: Marantz SR6014 Marantz...

Hi, I have an opportunity to get a brand new Marantz SR7010 for dirt cheap, like $400USD. I came upon it when a deal on an SR6013 fell through and the store ran out of inventory and they discovered they had this unused SR7010 in the back, likely for a couple years. From what I see, the...

I have recently connected my LG C9 TV to my Marantz SR7010 by optical cable after ARC proved unreliable. Now optical has failed too! This is why it is a weird problem: 1. LG optical signal is not picked up by Marantz receiver, but when I have plugged a Bose soundbar in (using the same cable)...

Hello -- Can anyone help with my broken ARC? Video and audio worked fine one night with the ARC connected, as it had for several years. The next day, video did not display; later that day audio was gone, too. Replacing the HDMI cable did not fix it. Cabling to avoid ARC works fine. Is...

My marantz is playing up and none of the HDMI ports work right now. I have had this before but got it working again. I want an 11.2 channel receiver for atmos. Sound is my most important feature. cheers.

Hi all! Hope someone can help shed some light on on a dilemma I have. I've got a bargain on a 2 months old Marantz SR7012. Today I have the SR7010. I have done some research, and can't find that there are very big differences between them. Only thing I can see is support for eARC, Airplay v2 and...

Marantz SR7010 popping/crackling audio problem I hope someone may be able to help me troubleshoot the root cause of a playback issue I've had since I purchased this receiver. I use it 99% of the time with video sources. Across all sources, I get occasional audio noise through various...

I'm starting to get a bit unhappy with the quality of the software on my Marantz SR7010. It has now stopped recognising any device plugged into the HDMI 1 port. As usual with this AVR, if I reset it back to factory settings it all works fine so it doesn't appear to be a hardware problem. I...

My Marantz SR7010 has suddenly stopped passing through audio on any input. I have saved my configuration and reset the SR7010 and it works fine. When I log my configuration, it is back to silence again. I'd rather not have to go through the set up process again as it takes hours and I have got...

Guys Just added front heights for atmos and noticed the power amp switching between front height and rear height during audessey I preout the front pair to a power amp so have 7 channels available on the 7010 Without clambering around the room during playback, will the amp assign the ‘spare’...

I recently got a Marantz Sr7011 to power my Dali 5.1 set up which is an amazing upgrade from my previous Onkyo, however I'm now open to further upgrades and considering the Dali Alteco's as either front upward firing or height speakers as a starting point. I can't really have them sat on my...

Hi. I need your help,... again :) I got a new 7 channel power amp (Emotiva UPA-7) and I want it to drive my 5 main speakers. I have connected the Emotiva with the 5 pre-out ports and run Audyssey on my Marantz SR7010 (9 channel amp, 11 channel processing). all 11 speakers worked. Then I looked...

Hey everyone - Was wondering if anyone had any idea about an issue I am having. When I plug my macbook pro into my Marantz SR7010 receiver I get what appears to be a handshaking issue. Every 5 seconds or so the video and sound cut out and back in again and it continues to do this forever...

Hi All, was looking for some advice regarding my system. I am currently running 7 Channels on my SR7010 (5.1.4 atmos set up) so have 2 additional channels doing sod all. Do you think it is worth bi-amping my R500's? I feel there are pros and cons to doing this and would appreciate any...