anti-mode

No Wikipedia entry exists for this tag
  1. K

    Deal Agreed Dspeaker Anti-Mode 8033 Cinema 8033S-II (Based In UK)

    Hi I am going throught the motions here. Bought speakers & amp, not enough bass, bought subwoofer, spent months trying to find best placement inch by inch, unhappy with results, told I need to buy a 2nd Sub (Not happeing... for a while), questioning all of my purchases, read about Anti-mode...
  2. W

    Dspeaker anti-mode 2.0 broken

    Hi, if there are any fellow dspeaker anti-mode 2.0 dual core speakers here, what is the minimum - dB on the SPDIF input the unit allows? My screen has died, so I need to set the volume to its lowest, and if I know what that value is, I can work out how many times to push the volume + button so...
  3. mjbtin

    Question RX-A3070 YPAO or Anti-mode

    Anyone using an anti-mode with an rx-a3070? Did it improve bass?or did YPAO do as good a job? Happy with the bass using ypao but have that feeling may be missing something:) May see if I can get a used 8033 and give it a try. Martin
  4. barwell1992

    Question 2x Anti-mode 8033 Cinema or 1x Anti-mode 8033S-II for Duel subs

    Hi all, So, Moving into a new house with a bigger living room, as a consequence I'm now looking to buy another Bk Monolith Plus, the dilemma I have is that I already have an anti-mode 8033 cinema, I'd like to keep the ability to ping each sub to set phase/delay individually from the amp rather...
  5. P

    Question Using DSPeaker Anti-Mode with nearfield subwoofers?

    I've got a 5.2 setup with two XTZ subs up front and an additional two nearfield subs behind the main listening positions - the latter being driven by a single iNuke 6000DSP. I'm using Yamaha's YPAO to equalize the 5.2 speakers, along with the - limited - tuning options on the XTZ subs and then...
  6. droidlike

    Dspeaker Anti-Mode X4

    DSPeaker-Anti-Mode X4 Anti-Mode X4 DSPeaker DSPEAKER X4 - EQUALIZZATORI SPEAKER CONFIGURATION First define your speaker setup. A normal stereo system with two speakers and no subwoofers is referred to as a ”2.0” system. The speakers should be connected to the Primary outputs (XLR, RCA, or...
  7. droidlike

    Dspeaker Anti-Mode X4

    DSPeaker-Anti-Mode X4 Anti-Mode X4 DSPeaker DSPEAKER X4 - EQUALIZZATORI SPEAKER CONFIGURATION First define your speaker setup. A normal stereo system with two speakers and no subwoofers is referred to as a ”2.0” system. The speakers should be connected to the Primary outputs (XLR, RCA, or...
  8. DodgeTheViper

    Anti-Mode with Dual Subs

    My AVR has dual sub outs. So if using the 8033c, should i use a splitter before the Anti-Mode, then a splitter after into the subs ? Or if using the 8033s, single RCA's before and after the Anti-Mode. Any benefit or otherwise for using the 8033s over the 8033c ? Just been reading some...
  9. Pilgrim123

    Question SI Ht15 x2, Behringer NU6000 sub build

    Hi all, I am after a bit of advice please, I'm looking at building 2x SI Ht15 subs, powered by a Behringer NU6000 and DSP by an Anti-mode 8033. I have currently got a couple of boxes which I had made from a pre started build, but then saw these SI HT15 subs for sales. My new boxes are...
Back
Top Bottom