[djcla]

I have found this link http://anime.nickistre.net/blog_entr...dec_conversion

But when i use virtualdubmod i get an access error when i try to convert the file even though is opens it fine initially. I had the same issue in alltoavi as well rather odd. I may have to work out the best codec options or something but i have not used windows for so long i can't remember the best way to set them all up. When i used avidemux the output would not play on the 360.

[AdsterUK]

I used Videoraon an MKV file and it worked flawlessly without needing to know anything even remotely technical. Converted it to mp4 though.

Theres an "advanced" option to set the number of cores you want it to use. My 2.4ghz quad core converted a 43 min long 1.2GB HD file in around 35 mins

[SibTiger33]

Originally Posted by djcla

I have found this link http://anime.nickistre.net/blog_entr...dec_conversion

But when i use virtualdubmod i get an access error when i try to convert the file even though is opens it fine initially. I had the same issue in alltoavi as well rather odd. I may have to work out the best codec options or something but i have not used windows for so long i can't remember the best way to set them all up. When i used avidemux the output would not play on the 360.

winavi works but im losing 5.1 audio?

will keep working on it htough

[SibTiger33]

Originally Posted by djcla

I have found this link http://anime.nickistre.net/blog_entr...dec_conversion

But when i use virtualdubmod i get an access error when i try to convert the file even though is opens it fine initially. I had the same issue in alltoavi as well rather odd. I may have to work out the best codec options or something but i have not used windows for so long i can't remember the best way to set them all up. When i used avidemux the output would not play on the 360.

what error do u get?

personally i would uninstall all your codecs - i believe there is also a program which can uninstall codecs too

then reinstall community codec pack and xvid and try again

i've tested using virtualdub and it works fine although for my machine its a little slow

i.e for 1min of video it took 4 mins to convert but i was able to keep 5.1 sound and very high quality video

[djcla]

thanks for that i will try , uninstalling all my codecs and start again. I used the codecs from the zoomplayer download so codecs might be the prob.

Ta

[SibTiger33]

Originally Posted by djcla

thanks for that i will try , uninstalling all my codecs and start again. I used the codecs from the zoomplayer download so codecs might be the prob.

Ta

hahaha zoomplayer!!


crazy


i use zoom player - fantastic player but i hate the whole "WARNING - PLEASE INSTALL CODECS NOW" - it asks you to install like 12 extra codecs! - none of which are really needed :-)

install zoom player again without the codecs it sometimes asks for - it works fine still :-)

[ds17]

Originally Posted by AdsterUK

I used Videoraon an MKV file and it worked flawlessly without needing to know anything even remotely technical. Converted it to mp4 though.

Theres an "advanced" option to set the number of cores you want it to use. My 2.4ghz quad core converted a 43 min long 1.2GB HD file in around 35 mins

whats the quality like and was there a size increase in the file?

ive been trying to figure out a decent method to convert mkv and havnt found one that doesnt take ages

does WMP11 stream mp4s????

[djcla]

Originally Posted by SibTiger33

what error do u get?

personally i would uninstall all your codecs - i believe there is also a program which can uninstall codecs too

then reinstall community codec pack and xvid and try again

i've tested using virtualdub and it works fine although for my machine its a little slow

i.e for 1min of video it took 4 mins to convert but i was able to keep 5.1 sound and very high quality video

ok got this working now sort of, i reinstalled codecs and xvid etc. What did you do with the fps setting in avc2avi? if i do a -f 23,976 (NTSC film i think) the resulting avi runs at lightening speed. Or have i got something wrong?

[SibTiger33]

Originally Posted by djcla

ok got this working now sort of, i reinstalled codecs and xvid etc. What did you do with the fps setting in avc2avi? if i do a -f 23,976 (NTSC film i think) the resulting avi runs at lightening speed. Or have i got something wrong?

i dont touch the frame rate in av2avi

i change the framerate in virtualdub only

and virtualdub does always show the framerate im expecting so i know its right.


i just use avc2avi to do just that - avc 2 avi - no other changes


do what i did mate - test using samples first to make sure it works.


i've very happy with the end results of my converted file

[djcla]

i will try that but avc2avi is auto setting to 25000 fps which is not the same as source , and when i convert leaving the frame rate alone in vdubmod it is out of sync with audio..

[SibTiger33]

Originally Posted by djcla

i will try that but avc2avi is auto setting to 25000 fps which is not the same as source , and when i convert leaving the frame rate alone in vdubmod it is out of sync with audio..

do u not change the framereate in virtualdub?

there is an option to change the framerate


u dont need to change it in avc2avi because u can do it at once with virtualdub - video menu - then frame rate - (change video and audio to match suggested )

[SibTiger33]

UPDATE:

i thought ill test this method doing an whole HD FILM from the mkv format to avi

I can 100% confirm that the file works on the 360 without any issues

final file size was 5.5gb (smaller than the original source file)
converting time was about 5hrs/6hrs approx

using the xvid codec and 5.1 ac3 audio

[djcla]

Originally Posted by SibTiger33

UPDATE:

i thought ill test this method doing an whole HD FILM from the mkv format to avi

I can 100% confirm that the file works on the 360 without any issues

final file size was 5.5gb (smaller than the original source file)
converting time was about 5hrs/6hrs approx

using the xvid codec and 5.1 ac3 audio

yeah seems the best method, i am now trying mencoder with mewig will let you know the results.

[djcla]

Originally Posted by SibTiger33

UPDATE:

i thought ill test this method doing an whole HD FILM from the mkv format to avi

I can 100% confirm that the file works on the 360 without any issues

final file size was 5.5gb (smaller than the original source file)
converting time was about 5hrs/6hrs approx

using the xvid codec and 5.1 ac3 audio

Yeah works really well this guide, i use a 4000 bitrate at single pass keeping the resolution as hd and works a treat. Size is not much bigger that the original and the whole preocess does not take long. I would say quality is just as good as original.

[SibTiger33]

Originally Posted by djcla

Yeah works really well this guide, i use a 4000 bitrate at single pass keeping the resolution as hd and works a treat. Size is not much bigger that the original and the whole preocess does not take long. I would say quality is just as good as original.

generally i just use a higher bitrate to the original file bitrate

i think when you select a bitrate with the xvid encoder it uses this as the floating average.

So my original movie was 5403 or something i selected 5693 and the final bitrate was about 5302 average

[djcla]

how do you get the bitrate info of an mkv ?

[SibTiger33]

Originally Posted by djcla

how do you get the bitrate info of an mkv ?

i use mediainfo


mediainfo should be attached to the right click menu if installed correctly


so right click on any mkv file then go to mediainfo

go to views and tree view and u will see the bitrate there

[jigman]

does anybody know of a xbox 360 video converter that will work with vista 64bit ultimate edition ??