PS3 and Iscan HD over component Only 576P works

[Maninblack]

I have plugged a PS3 into the component input on the Iscan.
The system has been set up for some time for 1:1 pixel map on my Fujitsu.

If I change the PS3 output from 576 to say 720P, 1080i, or 1080P, the image sharpness improves, but the screen is green in colour.

Is 576 the only option? Iscan has never been updated, but I thought it would accept the PS3 output of 720p and scale to my screen?
I see that 720P is passthrough?
Sorry Iscan is connected to Plasma via HD15.

I have a component board for the Fujitsu, and the manual states it would accept 720P and 1080i, maybe this is what I should try?

[Maninblack]

Originally Posted by Maninblack

I have plugged a PS3 into the component input on the Iscan.
The system has been set up for some time for 1:1 pixel map on my Fujitsu.

If I change the PS3 output from 576 to say 720P, 1080i, or 1080P, the image sharpness improves, but the screen is green in colour.

Is 576 the only option? Iscan has never been updated, but I thought it would accept the PS3 output of 720p and scale to my screen?
I see that 720P is passthrough?
Sorry Iscan is connected to Plasma via HD15.

I have a component board for the Fujitsu, and the manual states it would accept 720P and 1080i, maybe this is what I should try?

I think the component board is the way to go, but need to hoik the thing off the wll to fit the add on. Mib

[roman-r]

I think you will find that the Iscan is sending an RGB HV signal to the Plasma.

When you push through 720p the Iscan does nothing so the Plasma is receiving a component signal (something like Y Pb Pr) which is what the PS3 is most likely sending out.

If you can toggle the plasmas HD15 socket to accept component all will be fine.

Some panny plasma only allow RGB HV on HD15

[Maninblack]

Couldnt get the HD15 to accept component, but the add on component board and now all works well