I've noticed my Toshiba 42PW23P seems to have excessive red in the picture. For example, the last episode of Buffy- Anya was weaing a red dress- it looked awful. Reducing the colour helped, but even at a low setting it seemed high (and of course the picture lacked colour vibrancy)

I've read that using a attenuator on the red component lead will help (sort of), but the red component lead also is releated to the G & B grey level. And it will not fix broadcast programmes as well.

I have found out the RCUT and RDRV is not the red colour decoder setting. So how can I adjust it?

Thanks
Nathan

my old sony had a similar problem. i took the front off (speaker mesh) where there were 6 knobs. £ of them are for the 3 colours, blue green red. I turned the red one down slightly. BINGO. great colours again

shaun

I now the focus ones adjust the focus, obviously- but I have read nothing about the screen pots.

I would like to find info before I adjust them- not knocking you, but I've read your other post regarding your new Sony.

my other post???????

The Sony 44", service menu probs (or is that someone else?)

not me.
shaun

Fixed the Red Push problem- instead of setting the colour/tint in Avia with the blue filter- I set the two settings with the red filter.

Much better now, the red blooming has gone..my settings are now

cont. 35
bright. 40
colour 34
tint +3
sharp -2

Nathan