I have got KV-32FQ86K and RM-945 remote control. What should I do to enter the service mode. I tried instructions from other threads with no luck. Could someone explain it to me?

[KKK]

If you still need Service mode for Sony KV-32FQ86K:

1. Turn on the main power switch and enter into the stand-by mode.

2. Press the following sequence of buttons on the remote commander

1. i+ (displayng info)
2. 5 (digit 5)
3. <+ (volume +)
4. (nexTView or tv)

"TT--" will appear on the screen
Other status information will also be displayed

3. Press "MENU" on the remote commander to obtain the Service Menu

!!!! Be very careful what you modify !!!!
!!!!! YOU CAN DAMAGE TV IN SERVICE MODE !!!!!
You will not make improvements if you change factory settings.
Note every change you make!!!

4. Press "MENU" on the remote commander to exit Service Menu

5. Switch the TV set OFF and then ON.