[Mr_Rick]

Hi, sorry if this is a daft question but just acquired a 2nd hand 36ZP46 and want to auto-tune it. Trouble is there are no tuning options in the set up menu.

Have seen this before (on previous Tosh) when keeping menu button pressed would reveal these options but that doesn't seem to work here.

In a possibly related issue the set's response to the remote seems to vary depending on what video source it is showing! On Ext1 (Sky) it responds fine but on freeview or aerial it often doesn't respond at all and at best very sluggishly.

Any thoughts on either of these issues would be most welcome.
Thanks
1050

[JayCee]

Make sure it's on the internal tuner by pressing the AV input button, press button 1 and press Menu, right arrow until you see Setup and then the tuning options should be available...they are not usually available if the set is switched to an AV input.
The owners manual can be downloaded from herehttp://tesc.toshiba.co.uk/Web/Websit...t?OpenFrameset
You may want to edit the title and remove a couple of extra "Z"S

[Mr_Rick]

Thanks JayCee, now tuned fine.

Anybody got any thoughts on why remote is sluggish depending on input?

Apologies for the extra Zs by the way - must have been more tired than I thought this morning